Summary: I have also had problems with WD drives. - Try removing all jumpers, thne try - I had my C: drive suddenly not detected after working fine for 3 month...
Summary: Thank you all guys very much for very valuable advices! I have solved the problem. The problem was with my BIOS. It was too old. Following the advice ...
Summary: hard drive bios problems... I just upgraded at fry's to an AMD 900 system with a preassembled motherboard/case/ethernet/sound etc package. I install...
Summary: I have a mp3 player and it works like an external hard drive, my problem is that my computer doesnt detect my mp3 player.... its supossed to appear a ...
Summary: Problem: I just added a hard drive to my desktop and when I power it off and power it back on the bios is unable to recognize the drive unless I warm ...
Summary: I have a WD hard drive with Win2000 loaded on it that is now corrupted. It spins up and keeps spinning while the pc is running. I can also detect it...
Summary: I dont know whether this is a Win 2k problem. I just installed a new hard drive and both bios and Win 2k device manager pick it up. My problem is that...
Summary: My last mobo chipset required the newest version of Intel App. Accelerator.. I went through a series of Western Digital 200 gig HDDs because I didn't ...
Summary: Don't be worried. The reason you don't get the clacking noise all the time is probly because the second hard drive is only being accessed part time. ...
Summary: Thanks, I tried that and of course, says "no non-dos partition" to delete. When my machine boots up, I see the my hard drive and the added WD hard dri...
Summary: I have been given a 180gb western digital hard drive, but have been told that Windows 2000pro (which im running) only reads HDD up to 128GB (as it is ...
Summary: I use a NEC Versa SX notebook which runs on WIN2K. Since the internal hard drive is becoming too small, I got myself a larger hard drive and installed...
Summary: I am attempting to install a second Seagate 40g hard drive. I have the original drive jumpered as master (pins 7/ and the new drive jumpered as slave ...
Summary: After removing a bad slave drive, and using my master drive as a single drive, Windows notified me that it Found New Hardware (my hard drive). Then it...
Summary: I try to install win2k pro from a cd on my 30.7 gb IBM deskstar hard drive and get the error message no hard drive detected. I see in start up that th...
Summary: I recently just bought a new 40 gig hard drive and already had a 8 gig in my computer already. My problem is that its not assigning a drive letter for...
Summary: Hello. I have just recived a new replacement hard drive from Maxtor. I partitioned it into 4 partitions, the main one NTFS, and eventually the others ...
Summary: problem: put my computer into sleep mode, so the hard drives switched off. while i was away there was a power cut and now when i start it up the bios...
Summary: ok heres what happened -- My hard drive (Fujitsu MPF3204AH-20g) worked fine before I purhase the new hard drive (MAxtor 40g). First of all, I put my M...
Summary: I built a new computer and want to use my old hard drive and cd rom in it. The new computer is an MSI motherboard with a 2.8ghz P4 and 512mb of DDR ra...
Summary: I have 3 hard drives, all western digital. One is a 4 gig, the second is 8 gigs and the other is a 10 gig. I upgraded from Windows 98 to Windows 200...
Summary: I hope someone can help me. I have just recently formatted my seagate 6.4gig hard drive to do a clean install of win2k pro. when asked, I converted to...
Summary: Please help - I have to reformat this hard drive TONIGHT (niece leaving with computer in the morning). Computer has alot of problems - i just need to...
Summary: Install only one drive,the one to boot Windows 2000 from on the first IDE port as Master.Make sure the drive is detected by bios.You can use Auto sett...
Summary: Hello Richard, I use Western Digital hard drives also. I use WD's Data Lifeguard for DOS and WIN. I use WD's Diagnostics for DOS and WIN. My personal ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
