Summary: I have added a W2K DHCP server to my LAN. The LAN prior to adding this DHCP server had a W2K AD-DC server with RRAS/NAT acting as the DHCP server. I h...
Summary: I am trying to install W2k on a AsusA7V m/b with Promise ATA100 controller. I have got past the HD controller driver install, partitioning etc, but wh...
Summary: I have a question about adding a W2K DHCP server to a W2K Domain. I have a W2K Server domain controller all set up with DNS, RRAS. I want to add a DHC...
Summary: I want to add a DHCP Server to my W2K Domain. I presently have a W2K Server and a few W2K Prof clients. The server has DNS, RIS, RRAS/NAT (NAT acting ...
Summary: Hi, I m going to install w2k dhcp server over 2 subnet (A,B) which resided at 10/F & 11/F office respectively,the problem is : i donno how to config...
Summary: I am facing the following issue with a w2K Server with Abit KT7A-RAID mother board. The board has two I/O RAID ports controlled by High Point HPT370 c...
Summary: when I log on to windows, it says there is a configuration problem, click ok to start the instalation wizard. when I do this, it searches for new har...
Summary: I've got a big problem with my ISDN Adapter. It is a external ELSA Microlink ISDN Internet on serial Port. I think it is only a configuration problem,...
Summary: It is easier to connect the Server direct to the Internet, the Server has two NIC cards and uses a switch to connect the 2 clients: Internet W2K Svr N...
Summary: Kim, When W2K server is installed on a disk for the first time it should finish (after reboot) with a screen that says "Configure Your Server". The pr...
Summary: Hi, On a network of 6 W2K PCs and 1 W2K server, we have a problem with one PC. All the PCs have the same TCP/IP, DNS, DHCP configurations but one of t...
Summary: Boris, Just a thought, but do you have zone alarm installed in either of your systems? Maybe you're using a router for your LAN? Many problems arise...
Summary: I am running a small LAN at home with 3 computers. My main computer is running w2k advance server and other two with w2k pro and win98. Everything is ...
Summary: I wanted to upgrade my old win98 to w2k. Thought it would be a walk in the park, but you know what happens when you start something with that attidud...
Summary: Hi, Somebody help me please, I have 3 computers connected to my Lan. (win98,win2000,and Xp). They all ping's each other perfectly and with Network Pla...
Summary: my system will be hanging when i install a lan card driver in windows 2000.my system configuration was pentium 200mhz with 20gb hardisk with 128mb ram...
Summary: Folks, I have a 20MB Dell computer with Win98SE loaded. I used System Commander 2000 to partition the drive to have W2K installed. When booting up - t...
Summary: Hi Barry, I have the same problem. I use Windows 2000, configured for DHCP with my cable modem for internet access. I get a minute or two ok, then I g...
Summary: I have a small LAN in my home and use Win98SE ICS with no problems. When I boot the box with the modem into W2K, I can't ping the W2K box from other W...
Summary: DHCP is a Server Service you can not be a client of your own DHCP thats why your computer says dhcp disabled if you have an W2K computer and a W2K ser...
Summary: Hi everybody, I am having a problem on win2000 (as well as on XP) that makes me keep using win98. I am connected to a Lan, of which i have Ip, gatewa...
Summary: having problems configuring my network card with windows 200o professional amd k62 500 linksys fast ethernet 10/100 adsl with earthlink i see the mode...
Summary: Posted a message about this installation at computing.net. This document contains the procedures that were performed by me to install Windows 2000 on...
Summary: I initially had RRAS/NAT handing out ip addresses to the clients, thus clients were getting internet access without me having to set any default gatew...
Summary: This is my configuration: My server configure with Active Directory, DNS, DHCP, RRAS, VPN. I used modem dial-up connection to connect to the Internet....
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
