Summary: I want to make use of my voip from my office as well as my home. I want to purchase 2 linksys pap2 ata devices and have conventional phones plugged in...
Summary: Hi, I am new to Cisco VoIP. I've been configuring to get VoIP working on 1760-V with 2FXO card. I do not configure SIP or H.323 yet. I connect the FXO...
Summary: Hi, I am not sure if this is the right place to post this. I have 2 offices. Office A has an 8 line 16 extension PABX and office B has a 3 line 12 Ext...
Summary: I have a Netgear EN108 Hub and I am trying to get my laptop and VoIP phone working through the Cable modem. I am able to get to the internet from my c...
Summary: I have a network with 60 pc's and we use VOIP. The VOIP uses VLAN2. The DHCP server for the computers is on VLAN1. Some of our new dell laptops are...
Summary: Hi All, I recently purchased a CompUSA Brand ATA/100 controller card to speed the performance of a 500 Mhz AMD K6 II system (FSB 100MHz). The contr...
Summary: Hi Guys ... I need to monitor traffic on a router and also send traffic directly to a router. I need to study the packet formats passing through the r...
Summary: Hi techies, I have a voip device and a computer. want i want to do is connect both at the same time. I have a adsl connection with a dlink 502t router...
Summary: Hi All, I recently purchased a COMPUSA brand ATA/100 PCI adapter card for my Pentium 133MHZ system. Following the adapter card's installation instruc...
Summary: My system has two harddrives. One is Ultra ATA/66, and the other ATA/Fast-2 (16.7 MB/s). My system is an older Pentium-133MHZ, with possibly a PCI b...
Summary: Anybody experienced voip over high latency satellite networks? What's the preferred codec over another and what other work around parameters to overco...
Summary: Hi. I've a wifi lan that works fine with pcs, but i've installed a voip phone and there are some problems: I`ve two access point: master and client M...
Summary: Can any of you guys tell me the best places to obtain information about VoIP. I need to know how it all works, what equipment is required, What softw...
Summary: Hey all! I have a funny question. I have been reading briefly about VoIP, and I recently signed up for a telephone service that uses VoIP. I had a tho...
Summary: hello all, i run a wireless isp covering a few rural towns. currently i'm pipeing highspeed internet thru the wireless but i would also like to offer...
Summary: I've got broadband cable with voip. My computer is connected via Lynksys WRT54G wireless router. Connected to the computer is my HP 6210 all-in-one. T...
Summary: Hello all, We are a company with about 40 employees (25 + 15 remote users). We want to have 3 VoIP lines to 3 of the executives at their home office ...
Summary: >> To link two switches together, you need a crossover cable. << That depends. Most switches these days have auto sensing ports that will confi...
Summary: I would suspect either two things; 1. your switch is dying, 2. it is not a VoIP switch and does not know how to hangle the Voip converter (cisco ATA 1...
Summary: I have SMART VOIP IAD, but I don't have good manual. This equipment have 1 FXS, 1 FXO, 1 LAN, 1 WAN port. I connect analog phone on FXS port, and pub...
Summary: Hi, can any one tell me how can I connect my Cable modem, Voip Adapter and WLAN adapter on same network? (I need to know what comes first on wiring an...
Summary: Hi, I have following :- 2 64K leased lines 1 Cisco 1750 router with 1 serial,1 ISDN Bkp,1 VOIP card what i want:- Divert data traffic from Leased...
Summary: I setup my PPPOE internet service on my VOIP D-Link router and connected my InexQ wireless router VIA ethernet and my PC to wireless router. My phone ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
