Summary: My GeForce4 MX420 is not working with my Asus A7V333 Motherboard? The Comp boots up (i can hear it) but i get no picture on my screen. I testedthe Gef...
Summary: I'm installing a GeForce2 MX200 PCI on my Compaq Presario 5340, which has an onboard video. SiS530, I think. Problem: When I plug in the PCI card and...
Summary: 0. Is your video card plugged in and have you reseated it.? 1. Check your RAM sticks, are they snapped in tightly and have you reseated those too? 2. ...
Summary: hello, i have a xfx geforece 6600 256mb agp video card. it has an onboard temperature sensor, but every time i want to check the temp i have to open u...
Summary: Hi ive built my own system using alot of my old parts. Anyway i have a AMD Athlon Processor and its in a Gigabyte GD-7ZXE MB. I have installed and put...
Summary: Recheck all cables and connection, Sometimes if the floppy disk or hardisk is plugged in backwards/wrong they will do that ( some cheap cables have no...
Summary: I have a 400W PSU and have the video card plugged in for sure. I have all the latest drivers and the latest Bios revision. I've overclocked my proce...
Summary: your new procssor shouldn't be fried, you can try to clear the cmos. or take everthing out, and leave only one stick of ram and video card plug in , s...
Summary: After installing a new CPU chips, the computer will power on when plugged in, but no beeps, no monitor response, can only shut off by holding power bu...
Summary: Well, think what you want I don't care. The option for 200 MHz never became available until I put in the 2600+... if it was going to damage my system,...
Summary: It depends on what you want to improve. Video cards can provide 2d quality (all of 'em are pretty good at this), 2d resolution (8mb is enough), and ...
Summary: Hello, I am hoping someone could give me some help with this unusual problem. I have a Dell Optiplex Gxi 200MHZ 32MB RAM PC. I have received my Gefor...
Summary: I have a compaq 5000 series model number 5bw220 Intel celeron 633 mhz processor. I hit f10 like oyu said to get into the bios but I am not sure if i ...
Summary: Hi, This is the second time that I'm posting this message, so I can get some new responses, because I really need to get this fixed: I just bought a l...
Summary: Yep. Have another computer hooked up to it through a switch box and it comes right up. I tested the video card(s) in yet another computer last night a...
Summary: First off I want to apologize to Jam for not making my statement about the 5200 Ultra clear. The card that I want to get is not going to replace that...
Summary: Hopefully you got the 128-bit version of the 9550? If not, you're basically wasting your time. Are you using the newer drivers that unlock the 9550? T...
Summary: hi all! I got a really anoying problem. Here is my config: - Asus A7V333-Raid - Athlon XP 2000+ - 2x512Mb PC2700 - 1x40 + 2x20Gb UDMA66 HD - SCSI CDR ...
Summary: overclocking both will offer best performance though causing card to run VERY hot, in some strange cases overclocking both mem and core actually hurt ...
Summary: me again, i forgot to mention, i stupidly keep my video card unscrewed, it's just kinda plugged in unsecurely... and also, that's the only AGP slot, ...
Summary: The G80-based 8800GTS cards will usually hit at least 600/1400/1850 (core/shader/memory). I've got both of mine running at 625/1458/1950, and I've see...
Summary: I've had a similar problem that just manifested itself last night. Turned off my PC and passed out, when I turned my PC back on core 1 was stuck at 1...
Summary: OK, I took a PS out of my computer that was working perfectly and put it in this one. Tried to boot. No video. Put a PCIE video card in the PCIE slot,...
Summary: i recently replaced my ati rage video card with a geforce2 video card. however, it doesnt fit properly with the slot on the motherboard. the slot on t...
Summary: I have another comp that has MS-6315 board (815E) chipset with 4X AGP slot. I put in a radeon 9200se without any problems so the 9550 will also work....
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
