Summary: I get the error message "veritas drive letter access installed" when trying to install Nero InCD 4. I think it may be due to HP RecordNOW which I had ...
Summary: I want to assign a drive letter to my canon Powershot A40 but i can't seem to figure it out. The camera shows up in "scanners and cameras" in my compu...
Summary: Can I specifically assign what drive letter will go to my hard drive?? It is not the boot drive (i have C: which is win2000 and D: which is winXP) The...
Summary: I previously wrote in for help with getting access to my USB pen Drive at college on the Network (please see no. 9504). I need to assign a new drive l...
Summary: >It happens all too often that in the process of relettering drives the partitions corrupt into an "overlap" status and you get plagued with error mes...
Summary: What happens when you try to assign a drive letter? See help and support pages. Some raid cards don't connect like a true raid card should. They are ...
Summary: My computer is a 1.4 Ghz Athlon and I currently have 2 hard drives. One is 60 gb and the other one is 10 gb. Initially I had the 60 gb partitioned t...
Summary: I checked that tool also in XP as I didn't know it was there at all. Since the Windows OS uses drive letters (e.g C, D etc), unlike Linux which incorp...
Summary: dro . . . Not quite right - you CAN change drive letters on any drive other than the system boot drive. Use Administrative Tools to do it (access via...
Summary: Hi everybody :) I have 4 Partitions c: Windows Xp / D: Muzik / e: Stuff and f: backup All are ntfs apart from f: which is fat32 because I have a ghost...
Summary: I had Linux on a second disk for a while, and I was using one of the few available Ext3 IFS drivers for Windows read-only access to that drive (the dr...
Summary: Right Click "My Computer", Choose "Manage". Your Computer Management window should open. Go to "Disk Management" and select the disk you want to chang...
Summary: Do this my friend, Access your CONTROL PANEL via your preferred method, START - CONTROL PANEL Then double click ADMINISTRATIVE TOOLS Then double click...
Summary: I am trying to install a Quantum V 18 gig SCSI HD i can see it in the device manager but it is not assigned a drive letter in "My Computer" and I cann...
Summary: You can change things around, but be careful that applications and directories are where they were installed. No use renaming the C Drive to D Drive i...
Summary: Hi, I have a huge problem... I have WinXP installed on an NTFS partition, and Linux on another (ext2). Seeing as Windows can't access ext2 partitions,...
Summary: How do I assign a drive letter to my slave HD? I tried using the dos commands as well as the computer management tool in XP but both were unsuccessfu...
Summary: I have my system configured this way. I have My Master hard drive and my Cd burner on one Ide controller, and another hard drive and a cd rom on the ...
Summary: Ok..this is strange. Somehow the drive letters aren't showing up when I double click on "My Computer". All the drives are there, and if I hover over...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
