Summary: I am a student taking a final in Cisco Routing and Switching I on Monday night. The hands on final is gonna require that I connect 5 routers, 2 hubs,...
Summary: Hi, I am new to Cisco VoIP. I've been configuring to get VoIP working on 1760-V with 2FXO card. I do not configure SIP or H.323 yet. I connect the FXO...
Summary: You'll understand - when it comes to IT, the boss always wants to be as cheap as possible. Even if that means using old outdated software and hardware...
Summary: Hiya, Firstly, to head anyone off at the pass if they ask. Here's my system XP pro, Athlon 1400 + 512mb DDR, Abit KG7-RAID MB, Asus GeForce 4 Ti 4600 ...
Summary: I hooked up a cisco 2514 router in my home behind a comecast cable connection, Ive got that connecting via int ethernet0 using dhcp, then use int Eth...
Summary: Okay...based on what you have written you most likely have a 1-port serial w/4-wire 56/64Kbps interface module. On top of that, a 2525 is a "token ri...
Summary: Dear All, I want to implement mac address security on all ports of a 2950 switch. Is there any command in cisco IOS which can implement this on all p...
Summary: Most bandwidth is controlled by using what is called QoS and/or traffic control. You can configure these bandwidth control methods using Cisco or Mic...
Summary: Howdy. The ACLs are stored in the config, so if you save the config after you define them, they'll be present when and if the router reloads. To speci...
Summary: Hi Folks, I have a cisco 2960 switch. I need to configure VLAN for 5 departments. I have never done the VLAN configuration before. Hence kinldy help m...
Summary: Hey gfan. No matter what, shop around. Make sure the switch has all the features you need (ie: Poe/QoS capable - L3 etc) and look at the price and ...
Summary: I have managed to crosscompile a linux kernel for an embedded system. But when receiving a videostream a lot of packets seem to get dropped. I am a li...
Summary: Glad to help md eskimo. Learning this stuff is like pulling teeth. No one who knows wants to let go. I figure the opposite. More I give the more I...
Summary: Hi Folks, I have a 1 Mbps Internet connection (Leased Line)configured in Cisco 1721 router.And i want to take control of a remote PC through remote de...
Summary: ip route 192.168.0.0 255.255.255.128 (next hop router interface ip address or this router interface to be used) command in global configuration mode....
Summary: mountain If you worked in cisco router you would have experienced this mode. This is ROM Monitor mode which is used to change the reg entries to break...
Summary: The answer to your first question is yes. You can xmodem over the console port your copy of IOS.BIN. http://www.cisco.com/univercd/cc/td/doc/product/...
Summary: i hade a acisco router 3660 with 8 bri ports. 3 ports are being used.if i put 1 port in multi link it work fine,but if i put 2 port in multilink the r...
Summary: Look up "Direct cable connection" in Windows Help. You can network the two PCs via a null modem cable fairly simply. If you had more than 2 PCs I'd ...
Summary: If the url below is wrong, go to Google.com and type in Cisco 675. Info and diagram http://www.cisco.com/univercd/cc/td/doc/product/dsl_prod/c600s/c6...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
