Summary: donde puedo encontrar los drivers para una tarjeta Fax modem Us robotics PCI modelo 0637 y si tiene alguna forma especial de instalarlo Gracias...
Summary: I am trying to install my us robotics modem on nt. I have the driver disk, and it seems as though it is installed but it still does not work. When I t...
Summary: I have a new Dell Desktop system that came with Win98. The internal modem was installed on COM5 leading me to believe that it is a Winmodem. I am tr...
Summary: I cant seem to load my EXT US robotics modem. I install modem with correct drivers on com 2, but every time I try dial out I recieve a fault stating t...
Summary: Here are the Specs of the system: Dell Poweredge 1300 w/ latest Bios upgrade Windows NT 4.0 Server w/ SP6a - PDC Digi Acceleport 8r 920 with US Roboti...
Summary: Hi I want to install a US Robotics modem on a computer. I installed the modem and then I want to add Remote Access Service. If I click Have Disk, ther...
Summary: I added an external US Robotics modem v.90 56k to my NT machine. Now, when the computer is powered down and the phone rings, it powers up the compute...
Summary: i have 3com network card and us robotics modem. while detecting network card and then have disk there is message network card not present.please help...
Summary: Thats the problem, I can't set it to a COM port because Windows NT says there is none there. It is a hardware based US Robotics modem. Plus its OEM ...
Summary: Firstly, I am not a computer tech, but I am not a complete idiot. I am frustrated and at the end of my patience with the computer techs at the compan...
Summary: Thanks for the responses. I am not sure about the second option as I dont have the disks for installing another version of Win. Re the first option: ...
Summary: I recently installed clean nt4 server and my allways working 3com56k us robotics is not recognised anywhere. when I try to install the nt4 drivers the...
Summary: The organization i work for has a Compaq NT terminal that needs to dial up into the network. we attemted to install a US Robotics 56K modem but got a...
Summary: A recommended NT modem?? I use a US Robotics Courier vEverything external. Hook it up to the paralell port and away it goes. Internal modems can be ...
Summary: Hi, I have an NT server (SP4), US Robotics 56K message modem. Using PC-Anywhere over modem worked fine until one day it just wouldn't connect. Last...
Summary: Just curious whether anyone else has the same problem. When I install the HSP 56K under W2K the O/S loses my mouse. I have to remove the modem from th...
Summary: Please Help. I am working on a PC that is part of a network (4 Clients) 1 File Server all running NT 4 Service Pack 6. The server uses MindSring ISP...
Summary: Hi I have an external US Robotics "I-Modem with isdn/v34" Which is connected to my SBS 4.5 server. Dial outs to the Internet are all ok but occasional...
Summary: I have installed windows nt4.0 on ntfs partition. I want to install modem now. it is giving error communication port is not installed. can anybody hel...
Summary: I am tring to use US Robotics Message Modem on Windows NT Workstation..but I is getting disconnected after every 2-3 Min. Suggest some settings for Wi...
Summary: I have had similar problems and unfortunately cannot solve your problem. However, what I did find out was, is the modem actually connected to com port...
Summary: I have new computer with Windows NT operating system and old modem: US Robotics 56K Win INT; Please help me to find driver for my modem for Win NT ...
Summary: I've got my RAS configured correctly to the best of my knowledge and have been able to dial into my server and connect just fine. However I noticed th...
Summary: I'm getting a 12007 "server name could not be resolved" error when trying to connect through DUN to a server. Sounds like the connection is being mad...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
