Summary: Hi, I'm running Mandrake 7.2 on a PentiumII 300. Every now and then I get a machine check error (see below) after which the system reboots after a cou...
Summary: i am trying to install mandrake 7.2 on my system and i cant get it to recognize the ata 100 HD. i have an asus a7v motherboard with the promise ata 10...
Summary: What is the best video card for mandrake 7.2? For this you may need my other hardware info: NEC MultiSync XV17+ (17") monitor. Tyan S1598 mobo, AMD K6...
Summary: I had all sorts of problems with the display in Mandrake 7.2 . Royce, sounds like your from aus, goto your local newsagent, have a linux pocket book w...
Summary: I'm another Linux newbie. I'm trying to get the network going in Mandrake 7.2. Since I'm on a University LAN, I'm having a hard time figuring out th...
Summary: If you started with Mandrake 7.2 you've had a shortcut to your trouble. I started from the DeLuxe 7.0 package, with insurmountable problems in Xwindo...
Summary: I have installed mandrake 7.2 on my win 98 machine that has 64mb of mem, 2.5 Gb HDD, s3 virge dx graphics, creative sound card and a motherboard base...
Summary: Hey all, I am running linux mandrake 7.2 with KDE enviroment. When i am using the terminal and try to use command ./configure && make or just ./config...
Summary: Hi! I have installed Linux Mandrake 7.2 Everything works fine except the sound. I have Creative Labs Sound Blaster 16/PRO Linux kinda ditected it, but...
Summary: ok, here we go... mandrake 7.2 fresh install, and i am attempting (as i had running flawlessly w/7.1) to use the windows 2000 bootloader to boot linu...
Summary: I had a similar problem installing Caldera OpenLinux 2.4 on my system with Windows 98. I'll assume you know HOW to install and partition and stuff an...
Summary: I have a P3-733 with 256 megs ram, ATA 100 30 gig HD (for Win 98SE) and a WD 3.1 gig HD (for Mandrake 7.2). I use System Commander to allow me to pick...
Summary: Help!!:) I have Mandrake 7.2, and I cant connect to Dalnet on IRC, can someone help me. I've tried Pidentd but it didnt work, can someone help me than...
Summary: I had the same problem. The previous post gives the right method: Install your system but do not test the X configuration Then boot in Linux and run X...
Summary: Hi, I am new to Linux and installed Mandrake 7.2. Everything worked fine except of the x server. I have a Trident 3DImage975 with 4MB of video memory...
Summary: When trying to logout of Mandrake 7.2 I hear the little logout sound and then the OS doesn't logout. From there I am forced to shut down the computer...
Summary: I am a newbie to Linux. I have a P3-933Mhz, IBM ATA-100 30gig HD, creative Annihilator Pro video card, SB Live sound card, 256 meg ram. I have my driv...
Summary: Hi. Like i said i have Linux Mandrake 7.2. Ill give some specs about my hardware: MONITOR: AOC Spectrum 7Vlr 30-70Hz;50-130 GRAPHICC: SiS 6326 AGP 8MB...
Summary: Hey, I have an AMD k6-2 500mHz with 128 megs of ram, a 10GB samsung harddisk. I have winME installed in the primary partition. I had Mandrake 7.2 inst...
Summary: If you don't need to switch runlevels while booting or during a runlevel switch, Aurora is perfectly useless for you and you're better off without it....
Summary: I was looking forward to getting Mandrake 7.2 from the cover of linux format, so i put the cd in, it asked if i wanted to share the partition with win...
Summary: Hi, PartitionMagic6 won't start after I use DiskDrake that come with Mandrake 7.2 to partition the drive, and when i run PartitionInfo it said i hav...
Summary: I've installed Flash in Mandrake 9.2. I didn't install the Mozilla 1.4 that comes with Mandrake, instead I installed Mozilla 1.5. I copied the two ...
Summary: I have a Compaq Presario 5304 computer with MV520 monitor, Sas 530 graphics card and 64 meg RAM. When I installed Mandrake 7.2 the screen is somewhat ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
