Summary: I am trying to install a new USB printer (HP OfficeJet) on this pc but the system does not recognize printer when attached to the usb port. The softwa...
Summary: I cannot get usb drives to be recognized. (it will see flash drives ok) I have tried every usb driver I could find and the only one that sees the usb ...
Summary: Unfortunately it is not feasible to directly print to USB Printers. Epson still sell Dot Matrix Parallel Port Printers: http://www.epson.co.uk/product...
Summary: Hello Darren, I have the same problem. I think there might be an solution: If you have a network installed you could share the printer in windows (e.g...
Summary: SST-2845, UNC IDE I/O card, JDU 221380139. Does anyone out there have the jumper settings for this card? My cdrom is not recognized by dos and all oth...
Summary: Hi, I'm trying to play a dos game but my cd dvd drive is not recognized in dos. I get the error "no cd". I know I'm supposed to put code in autoexec....
Summary: Hello, I have some old games I still enjoy playing that required you to exit windows and boot the game via DOS. Well, for some reason, the CD-ROM is ...
Summary: Last night I was cleaning out some old, duplicated files and shut down. This morning I rebooted, my IBM 486sx ran through the POST and got to "startin...
Summary: I was given this computer by a friend because it would not recognize the hard drive he installed. I tried also and it wouldn't so I took it to a profe...
Summary: Hey Guys! I am having an problem. I reformatted my CPU's hard drive, and when I started it up again, it said This file is missing or corrupted... I go...
Summary: I have a Sonora computer bought in 95 and it has about 545mg 32mb ram. 90mhz.When the list of things that come up for computer what is on it It only h...
Summary: I have a Sony Vaio with a PCGA-CDRW51 CD drive attached via a PCMCIA card, and I would like to use Ghost to clone my PC onto CDs, however, when I go i...
Summary: Hi, guys. I have a 80486 with DOS 7.1 andUSB cards, a USB Pen Drive and the Matto Hairu drivers. Is it possible to use a USB printer with this configu...
Summary: Doug, I agree with what you say about USB printers not working with DOS drivers but as I said in my earlier post there are workarounds that are possib...
Summary: USBASPI.SYS Panasonic(TM) USB to ASPI driver v2.06 and v2.15 Reference Rev 4.0 updated 25 Feb, 2004 by madmaxUSB =========== For a brief history on...
Summary: Hi, I inform everybodies that DD Archos Usb 2 dont't work with driver "USBASPI.SYS". It's is recognized physically, but not logically (not affect logi...
Summary: USBASPI.SYS Panasonic(TM) USB to ASPI driver v2.06 and v2.15 Reference Rev 4.2 updated 1 Sept, 2004 by madmaxUSB =========== For a brief history on ...
Summary: USBASPI.SYS Panasonic(TM) USB to ASPI driver v2.06 and v2.15 Reference Rev 4.1 updated 2 May, 2004 by madmaxUSB =========== For a brief history on h...
Summary: meraj If you are running from an MS-DOS boot, I believe you are out of luck. MS didn't add support for USB till Win98SE and had already "phased out" ...
Summary: =========== BIOS Support for USB storage devices =========== I have tested USB boot functionality on recent system boards using the AMIBIOS 7.0 core ...
Summary: Hi, I can't use Ghost 2003 with TrueWin Case (Combo Case with Usb 2.0 and Firewire 400 connectors), because Drivers Usb 2.0 and Firewire 400 is not re...
Summary: pay attention! several mitsumi cdrom drivers are not easily recognized by standard W98 setup disk. You may need to download drivers from mitsumi's sit...
Summary: More information is required. Does your PC's BIOS recognize the hard disk? Likely, the CMOS battery went dead, and the hard drive's CMOS settings were...
Summary: ==================================== BIOS Support for USB storage devices ==================================== I have tested USB boot functionality o...