Summary: If I plug my SanDisk USB card reader in, the computer won't boot. It's hanging while trying to start the ACPI interrupt. If I put a memory card in, th...
Summary: USB card reader- have 2 computers with Windows98. When I install the card reader on the second machine and reboot- it Blue Screens. It works fine on t...
Summary: Forgot to mention that the USB legacy support is for USB mice and keyboards. If you don't have these, disable it, the reason being that if you have an...
Summary: My husband has Win98SE. We've been trying to install a USB card reader. It shows up in the device manager as being there, but will not bring up the ne...
Summary: I am getting the EXACT error message/location myself. I tried scandisk and memory tester (run for 9 hours - no errors). I noticed my cable modem was...
Summary: Greetings from a newbie: I would like to create a modified 98SE floppy boot disk so that I can read a SD card inserted into a PCMCIA flask card adapte...
Summary: Hello there. I am poting here because a strange boot problem has left me and my friend stumped for a few days now. Basically the story goes, we just...
Summary: I just get an usb card reader. Bad thing is that is a no name card reader. Any way, I opened and it has a Alcor AU 6368 chip inside.No where, after 3...
Summary: If your card reader cannot read from the SD card that is now a FAT232, you cannot copy anything form that card (meaning, no backup). Take your card to...
Summary: Boot problems with NIC, Autoexec.bat net start. I have been trying to intall a ISA Eagle Microdyne NE 2000 network card on a Pentium III Slot processo...
Summary: I've been trying to fix this problem for a while now - when i install my pci OPTi multi usb port card (which adds 4 ub ports to your pc) and start up ...
Summary: Hi, I recently got a Datafab parallel port card reader and 128MB Compact Flash Card for my Win 95 system/Nikon Coolpix, but can't get the card read...
Summary: I need the software for a proporta flash mate 5 in 1 usb card reader. Can anybody help? I can't find it anywhere!!! Thanks!!! This is really urgent :...
Summary: Thanks for your response, but one man's meat is another man's poison. Assigning letters at boot time implies 'fixed' and a degree or permanency but t...
Summary: My sister had a similar problem with her pc . Her specs are as follows EPOX 8kta3+ Mainboard amd athlon 1200 mhz processor Geforce 2 mx agp graphics ...
Summary: I hope someone may be able to help me here. I'm having serious fundamental boot problems after attempting to get Windows 98 to read a USB flash drive...
Summary: Hi All Guys, I have an absolete PC, PC133, which does not support ATA hard disc. Its Intel motherboard BIOS has only 2 boot sequences - A: C: or C: A...
Summary: I have Installed a PCI USB 2 card which require Win98SE on a Win98FE computer with no problems, I have also Installed the Lexar USB Jump Drive drivers...
Summary: Thanks for your help. Fortunately, I discovered where the problem lay -- I have a TV tuner card in my computer, though I no longer use it since I dec...
Summary: I have a boot problem. It only happens occasionaly. maybe 1 time in 20. After a cold start, during POST, the PC give strangulated beeps (very rapid be...
Summary: I'm trying to install drivers for usb2 card reader model no. HR-208NX. it has drivers for wim98se, but I have win98. is there any chance to fix the dr...
Summary: You have had the video card for two months and the slow boot problem for one month. So it dosen`t sound like the video card is the problem. You should...
Summary: I have installed a USB SanDisk card reader for my digital camera compact cards. I have a HP 722 inkjet printer installed on the parallel port. The pri...
Summary: Installing A USB PCI card to system running Win98 1st edition. Problem with US Root Hub driver saying it needs to be updated.....where can I get an up...
Summary: Since being supplied with an incompatible video card and then having it replaced with another one by the store we bought it from, we have had booting...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
