Summary: Hello all I am trying to make a boot up diskwith support for my USB 2.0 ATAPI CD-RW. I am tryimg to add it to a VIA Eden SBC, with a Eden 533MHz proce...
Summary: I have a IBM 486 and cannot get a C: or A: prompt. Every time I try to make a boot-up disk, message reads, "this is not a boot diskette" Can you tel...
Summary: I just had a computer donated to my class. We received no disks with it. No CDROM. When it comes on it say insert boot up disk. What can I do?...
Summary: Hi, I have a Toshiba Portege P2000 and I've been trying to rebuild this using the pcmcia cd rom it came up with. I am having a lot of troubles since ...
Summary: I'm running on a 333 compac presario..Whenever I start the computer I can hear it starting up then it just stops responding before it boots up any inf...
Summary: This is not a question, but an answer to the many many questions about this I get. Most USB boot problems come from two things: 1) Files were for Flop...
Summary: In trying to install soundblaster I messed up somewhere. Now the comp. tries to boot in floppy 3,5 drive (disk A)& will not recognize C drive. I canno...
Summary: Go to www.kewlone.com and download a dos disk. Then stick it into your computer before you turn it on. If your computer tells you to "hit del to run ...
Summary: I recently aquired an ibm thinkpad laptop from a friend and it has a password for windows NT! The dumb ass forgot to ask the person for the passowrd a...
Summary: Many thanks for your help Mechanix2Go. I used my original starting up disk to boot up, then typed in your suggested dir c:\windows\files32.vxd/s then...
Summary: Hi, First run FDISK and make sure the primary partition of HDD is active. If it's active and you still can't boot from HDD then boot from disk and use...
Summary: Trting to bring back life to an old machine but I cant seem to give it Cd rom support since the drive is so old and connected directly to a SB16 card....
Summary: Hi, I just got a new but old computer, something that I just can learn off of. I got it in pieces and I put it together and now when I try starting it...
Summary: Hi My father inlaw has given me his old pc a "IBM pc jr" yea I Know. anyways there is a lot of file dated from 1980's A.D. will I need the oldest dos...
Summary: I have an old Fujitsu T100. I have formatted that hard drive and am trying to boot up and havnt got a clue. I put in A:drive a boot up and Windows s...
Summary: I have a similar problem.I tried doing some config. to add a 2nd hard drive but I made a mistake somehow now I just want to start backup to get to win...
Summary: So when you allow it to boot normally you get the error regerstry corrupt? Try booting to safe mode (f8). If it does, make a new start up disk in add-...
Summary: Hi: I am trying to make a boot up disk which has fdisk on it. When I try to copy fdisk it always says file not found. is fdisk a hidden file how do I ...
Summary: Just change your bios settings so that there is no hard drive recogonized. When you boot up to the setup disk it will prompt you to install dos on a ...
Summary: Cdrom will work with SAME CROM DRIVER on Win98 boot disk. But Pc is only 16 bit so it is not Win98 compatible. But I try to use SAME CDROM DRIVER on ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
