Summary: USB 2.0 drivers for DOS by madmaxUSB (de la Vega) =========== History: * March-May 2003 * I had acquired a USB 2.0 external 10GB HD and started looki...
Summary: Hi there, this is a continuation of the post "USB 2.0 drivers for DOS" at this link: http://www.computing.net/dos/wwwboa... Since it's a old post (20...
Summary: USBASPI.SYS Panasonic(TM) USB to ASPI driver v2.06, v2.15 and v2.20 Reference Rev 4.4 updated 18 Jan, 2005 by madmaxUSB =========== For a brief hist...
Summary: The USBASPI.SYS included in the MHairu archive is actually for USB 1.x only, and does not support the /e parameter (which is supposed to select enhanc...
Summary: Hello. I've got a problem in loading USB 2.0 Driver on DOS. Recently, I bought a new computer with Nforce4 motherboard. When I tried to load USB 2.0 D...
Summary: The last time I partitioned my notebook (Toshiba Libretto), the OS can't be access. Message appeared said NTKRNL.exe is corrupt, so I tried to re-inst...
Summary: USBASPI.SYS Panasonic(TM) USB to ASPI driver v2.06, v2.15 and v2.20 Reference Rev 4.6 updated 3 Nov 2005 by madmaxUSB =========== Recapped from http:...
Summary: USBASPI.SYS Panasonic(TM) USB to ASPI driver v2.06, v2.15 and v2.20 Reference Rev 4.5 updated 23 Mar 2005 by madmaxUSB =========== For a brief histo...
Summary: Tis sad, but the darkehorse USB DOS forum is going down soon, so I thought I'd post this useful bit of info on results of my research in getting USB 2...
Summary: I have an external USB drive connected to a keyspan USB 2.0 PCMCIA card. I would like to use the drive to store Ghost image files. Does anyone have a ...
Summary: Thanks for all the replies, unfortunately I didn't have any luck. Since it seems that I need card socket services, and I don't have them, and don't...
Summary: Hi, I haven't visited this forum for a longer time so please don't be angry if I repeat the question that might have been already answered. I wanted t...
Summary: We, an IC design house, are looking for commercial licnese of "USB mass storage driver for DOS" from 3rd party software vendor or individual, for our ...
Summary: Hi there, i need a legal and free Vesa 2.0 driver for an C&T 65545 graphics chip for Dos. Any ideas how to get, DONīt mean UNIVBE from SCITECH...
Summary: Hello, after two days of hard investigation on a old P4-1800 on Jetway P4XFA-Mobo with internal USB 1.0 and my new cheap external USB 2.0 Controller V...
Summary: Anyone know where I can get a generic USB mouse driver for DOS? Most generic mouse drivers detect all PS/2 or Serial mice, but I can't find one that ...
Summary: Well....I started to search for a USB driver for DOS 2 min ago, this was the first page I stumbled on. Thank you guys for letting me know it's virtual...
Summary: hi, i am have a problem connecting my external hard drive with usb 2.0 pcmcia card under dos, every time i create the ghost 2003 boot disk and then i...
Summary: The USBASPI.SYS Panasonic(TM) USB to ASPI driver v2.06 Reference Rev 3.1 =========== For a brief history on how I got to research on this very useful...
Summary: ASHLEY4, Please email the USB drivers for dos to me at Briano@wegener.com Many thanks in advance, Brian PS: The guys at the FreeDos site also may be i...
Summary: Hi, I've been following several of the postings on how to get USBASPI to work with externally-connected hard-disks, and so far I've only had partial s...
Summary: I have tried using DUSE and the Panasonic 2.06 and mhairu drivers along with ghost. Both ways allow me to run everything fine but the speed is incred...
Summary: As you asked dominicus, I will respond. First and foremost as regards Norton Ghost it is old software which has been updated to take advantage of mode...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
