Summary: I had a Creative Labs Modem Blaster V92 which only would work on V90 even though my ISP supported V92. It wouldn't connect good but download for a fi...
Summary: I've recently upgraded my modem from a standard us robotics internal 56k pci, to an external us robotics 56k faxmodem that supports v92 (model 5686e) ...
Summary: My freind gave me an external US Robotics Sportster 14400 Fax Modem (CCITT V.32 bis with V.42 bis), but it doesn't have the power supply, I was wonder...
Summary: I just put this computer together from scratch. The motherboard is a ASUS A7V333-X . Everything works perfectly with the exception of the U.S.Robotics...
Summary: I just bought a new U.S.Robotics 56K PCI Fax Modem to replace my 5 year old U.S.Robotics modem. I have a K6Bv3+/66 System Board. The old modem was ins...
Summary: I was going for Ebay so that I could get a hardware modem (as opposed to a win or softmodem), that would hopefully achieve higher, more stable connect...
Summary: It can be done providing the modem "is" flashable, and you "can" find the correct flash. I just flashed a 33.6 US Robotics modem to a 56, no problem, ...
Summary: I am trying to find (desperatly) the firmware update to the modem model number gateway2000 telepath 33.6 manufactureed by us robotics. Modem Name . M...
Summary: >> Are all of the newer win-modems junk << Yes, always have and always will be. Get an external modem. A little more expensive but saves a lot...
Summary: I have reformatted my hard drive and used my system disks to reload my stuff. My problem is when I try to connect to the internet the modem goes throu...
Summary: Have one of them V90 56kPCI US Robotics modems myself and it is a pain in the a__! It disconnects me constantly. It is a what I thought to be one of t...
Summary: Besides your phone connection quality there's other factors such as modem type and ISP. I still use a USR ISA 56K Sportster at home and lemme tell yo...
Summary: Man, I am having the same problem. I have Win 2000 Adv Srv and it started rebooting every hour about a week ago. So I got a different Harddrive and tr...
Summary: Generally speaking, stand alone fax machines cannot be connected to a PC. They print as each page is received and usually only have an input buffer l...
Summary: P1 233mhz $5.00 plus $3.00 shipping. external US robotics Modem ( make sure power supply & cable is included)$10.00 plus $5.00 shipping( on ebay). fr...
Summary: Well I thought when I was posting it I was in the linux section. For some reason it asked for a sub category and it ended up here. Any way to move...
Summary: I am trying to install a "U.S. Robotics 56K PCI Faxmodem V.92" for a friend on his WinME machine. Unfortunately, he has lost the instructions. I tried...
Summary: I have a US Robotics Professional Message Modem and that is 9 V at 1 Amp. Make sure you get the polarity the right way round as well. The jack plugs ...
Summary: Hello. I am having connection problems with a US Robotics Megahertz 56k XJ5560 PCMCIA Modem. The drivers and firmware are updated. If the modem dials ...
Summary: I had this modem,its not a bad modem,but I never got over 44k with it. When I changed to a external US robotics sportster, I normally connected at 50...
Summary: I have to agree with MRRON there are slight differences in brands. I have used Creative Modem Blaster, and Zoom, and USRobotics. The best has been the...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
