Summary: We have a device discovery protocol which uses a UDP broadcast to find devices on the local network, and I'm trying to understand the behavior of wind...
Summary: the systems are connected via a switch in our server room. the program we are using is a java based program that our software programers are working o...
Summary: I have 2 NICs installed in a PC. NIC1 is connected to internet and NIC2 communicates with a processor board. Both NICs work well, I hace access to int...
Summary: Hi, I have 50 PCs in my LAN connected to Internet via a Firewall. This firewall is installed in a machine with 2 NICs obviously. But here is my proble...
Summary: From what I see of your setup, it shouldn't work. Typically, in a small LAN, you would want all devices, including the router's internal interface, wi...
Summary: hi, I am planning on using a linux machine as a router. It's a machine with 2 NICs, on for the WAN-side & one for LAN-side. Now i was told that a mach...
Summary: I have built a new ghost server. I would like the ability to run ghost.exe over the network with a network boot disk as well as use it on an isololat...
Summary: Ok... I think I did a poor job explaining the situation the first time. I have a Cable Connection, which runs a modem that connects via Ethernet, simp...
Summary: We clearly understand what you want to accomplish. What you need to understand is its not something you can do directly with software. Options are: Mu...
Summary: Help! I am integrating new XP machines into an existing NT4 lab domain and have found that proxy settings, printers, etc., are not persistent across ...
Summary: What you said about the connection being slowed by the computer handeling other programs at the same time doesnt really apply to some people. If you h...
Summary: Hi there i just set up a win2k system with 4 nic cards one card is where my internet connection is comming in now what i want is the other 3 nics goin...
Summary: Basically I don't prefer a router because of my relatively smaller needs. I cannot use ICS because I need DC. Plus, if server 2003 provides NAT, and N...
Summary: I figured out the problem, Win2k only lets me share the internet connection with one Nic at a time, not 2 at once. Does anyone know how to make it sha...
Summary: As we all know purchasing a router could give some people a heart attack. What i want to know now is this, is there no way one can convert an old PC i...
Summary: "This is too complicated. No wonder people don't post back after they find or don't find an answer. Scare them off. I give up." Don't shoot the messen...
Summary: Hi all! I need help...I have a question: suppose u have 2 subnets, say A and B, with a WinPc multihomed on the 2 nets (ipforwarding enable, call it Ro...
Summary: Either setup a hub/switch with both DSls on on oneside - use crossover cables rather than uplink or one uplink and one crossover. Configure multiple I...
Summary: Hey Gang, I'm usually a lurker - but i'm having a problem that's absolutely maddening that I just can't resolve. I've got -two- computers in a room ...
Summary: If your hard wired NIC (48.x.x.x) is used only on your corporate LAN, then you may be able to configure the TCP/IP settings to give it a static IP (e....
Summary: UDP is connectionless. It could be that if you set up your network commonly it would do that. UDP can be blocked by many things.\ 5.4 The Transport La...
Summary: You could try a program like WinProxy, which functions as an internet sharing app (proxy). It has a transparent setting that does not require you to ...
Summary: I know the IP is handled by Software but I don't know enough about NT to tell if there is a problem/bug with the NIC driver. Driver installation and s...
Summary: Hello, There are routers that can handle multiple DSL lines like Cisco routers but these are expensive, but there may be other routers less expensive ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
