Summary: How to setup on additional NIC on my W2K? I have one 3Com card with my cable modem, and put an additional card (that's work fine on another machine) t...
Summary: Did you mention whether your connected to a hub or router. I think what your trying to do is share both nic cards. The card your using for your intern...
Summary: Hello, I'm experiencing the following: In the small network I'm having (a hub with three PC's, a network printer and a router), I'm able to ping to al...
Summary: I would just like to say that I am running Win2k AS and I have two NICs installed. One is a 3COM ethernet for my cable modem running at 10Mbps and an...
Summary: Hi, I have the same problem, installing 3c509b under Win2k Professional. During installation of the NIC I have posibillity to pick-up drv of EtherLink...
Summary: Same here, won't work (have 1 nic on 100mbit and 1 on 10 mbit) but the help file in win2k gives some info.. Multicast routing Multicast routing, the p...
Summary: I am trying to configure two network cards in a windows 2000 server in order to set up a VPN. I installed the card and the driver. It appears in worki...
Summary: Using the NAT protocol? TCP/IP is the protocol that you should be using. NAT is Network Address Translation which will track all request from a priv...
Summary: You're a bit vauge, Two Nics, Two Nics with Dual Boot to different Networks. If you want to Dual Boot and only use 1 NIC for each OS, just Install you...
Summary: Hello, I'm trying to route 2 nic in win2k. NIC1 (10.10.0.10, mask 255.255.255.0, def GW 10.10.0.254) is connected to firewall to internet. NIC2 (192.1...
Summary: I use sygate proxy server for my Internet sharing......It works very well and can handle different ip ranges automatically. Also it sets itself up aut...
Summary: I have a windows 2000 machine on a network but I want to give it access to a second network through a different NIC. My machine recognises the two NIC...
Summary: That nic is not supported on Win2K, I don't understand how sander could have gotten his to work unless he misread your nic type prior to replying. Ran...
Summary: I have two machines on win2k.Each has a NIC card and I have a crossover or normal cable to connect them. Can anybody tell me the process of configurin...
Summary: Scot...why do you think you have to configure the forward zone as primary and the reverse as secondary? It's my understanding you want both as primar...
Summary: I have been running two servers with 100Mb/s network cards for over a year. This was fine until the size of the information being transfered between t...
Summary: I'm coming to the conclusion that my NIC's don't like Windows2000pro or vice versa(see previous message 8476) they worked with: win98 to win98, win98 ...
Summary: Wondering if someone can lend some advice; Im running a Win2k Adv. File Server connected to a FastEthernet switch. I've noticed a network bottleneck a...
Summary: You should have two cards on the computer with the Internet connection. Fill in your host and domain names in the DNS section on the second NIC card. ...
Summary: I have installed a second NIC on my W2000 server. The firt is used on a privat network, and I want to use the second for internet connection with a pu...
Summary: Hi! I write from italy and i hope my messagge is understandable. I have a windows 2000 server in a network. The server has two nic with ip address in ...
Summary: I have been running two W2K Advanced Servers for several months using a 10/100 card in each connected to a switch. From the switch to the net, etc... ...
Summary: I've had EZ CD5 running on Win2k. Had a problem with Win2k so re-installed. Now EZ CD 5 won't install. Am using SP2. All I can think of is that pat...
Summary: I installed Office 2K premium on WIN2K Professional (Single WorkStation), as an administrator. When I looged in as a user, it gave me Error 1706. It w...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
