Summary: Hi Is there a way I can have two NIC on one computer? I want to use a crossover clabe to share Internet Conn, but my router does not seem to work. ...
Summary: I have tried TWO different nic's in my machine, both are 10/100 tx and each one causes my machine to just pause on the WINDOWS 98 splash screen. The b...
Summary: I am starting to understand the idea of connecting two PC's, to just share files I was told that I need two NIC cards and a crossover cable. Now here ...
Summary: Does anyone recall which NIC card comes with the SBC Yahoo! DSL service? I've got two NICs on my computer, and I can't remember which came with the P...
Summary: I'm getting broadband and want to share the connection, so i'm also getting a router. I've never set up broadband so I don't know all that much about ...
Summary: hi, i just fried my mobo and have it replaced with a matsonic ms7057ct. everything seems working perfectly until i realize that xp wont detect my two ...
Summary: http://www.newegg.com/app/viewproductdesc.asp?description=33-122-008&DEPA=0 If you have an old computer around, you can make a near enterprise class l...
Summary: Hi. Got myself a little problem and would appreciate some input on it. I have an older computer that does not have any OS installed on it. It is a 16...
Summary: Lets clarify something here. Are you trying to make a crossover cable or a straight cable? The difference is in the crossover, the two sides are not a...
Summary: Hi, Pulling the hard drive out of one machine and installing as a slave in the new machine is is the easiest way, with no cost. You will need to check...
Summary: You can use Direct Cable connection using crossover serial or parallel cables, but I don't think you can set up a network with them. An Ethernet conn...
Summary: The processor may be too slow for a USB 2.0 card, but a USB 1.x card should work fine, and is plenty fast for a high speed cable connection. Other tha...
Summary: Didn't say the you NEEDED a hub (or router), just that it makes more sense to have a router with cable since then multiple PCs can then access the int...
Summary: do you currently have a network setup between the two PC's for internet connection sharing? If so, all you need to do is setup a defined share. If n...
Summary: Put together this PC a month ago and installed both XP and Vista in separate partitions. It works well (other than Vista being slow) but seems to spo...
Summary: hey dave02 thanks a lot for offering your help, i updated the firmware and the router admin indicates the version of the firmware i applied, the mac a...
Summary: Yeah, you need a crossover cable. It's called a crossover because the transmit and recieve are crossed at one side so two like devices (two NICs)can ...
Summary: "It seems to be worth the $40 to get the Belkin switch Orbital suggested." Plus shipping, if applicable. That doesn't give you the advantage of also h...
Summary: If you are talking about Cat5/6 network cable then the only difference is the way the plugs are wired. The following diagram will explain. http://www....
Summary: We have 2 usb printer hook ups, one usb hooked up to an apc and one NIC connection to the network. The last two days we have been unable to access any...
Summary: I installed a Ethernet Card to connect to the internet Via DSL before I realized I have an onboard NIC. The card I installed works just fine but the o...
Summary: I have three computers networked thru a router and two have the same NIC. As long as you can install the proper drivers for each one and get it fun...
Summary: last time my brother brought his computer back and i had to fix it because its got a faulty ram stick. after he brought it back to the college, it sta...
Summary: "I ping my connections to LAN controllers and NIC are at 100%, no packet loss.." Are you using DHCP and do you get an IP Address assigned? "Direct con...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
