Summary: I've got 3 PC's networked using a switch and had a wireless access point connected to the switch to enable laptops to access the network. I have ISDN ...
Summary: I have a Linksys befsr41 v.2 cable/dsl router, but in my area, we do not have high speed, only dial-up. So, I would like to use this router as only a...
Summary: I have an ADSL router which serves web to 2 computers. I want the computers to talk to each other as well, so I can share printers and files. How is t...
Summary: Could anyone tell me if it is possible to use a router's "WAP Only" feature to extend the wireless range of another different router? I have 2 routers...
Summary: Hello; is it posible to use a router as a switch if I want to connect vaious computers? I have a 4 port Netgear-Router i´d like to use as a switch. A...
Summary: Since you are trying to use the router as a switch only then you should disable DHCP and manually set IP in both the wired and wireless clients. Do no...
Summary: We have the following set-up. We have a server which has 4 computers connected to it. The server holds information on pricing etc which the computers ...
Summary: ISP : internet + ADSL + WRT54G -------> Me : WA601G (as bridge --- laptop (wifi) I have DIR-300 too and i want to connect it's to WA601G without wire...
Summary: Thanks for the reply. The Wan port is RJ-25...how do you plug a cable modem into that. I though it would be an ethernet connection to the router. Also...
Summary: I have 5 computer systems, a cable modem and 2 routers. I had all 4 systems and the cable modem connected to the one Router (DI-704P Rev A 2.56 build ...
Summary: I need some help please. I bought a linksy 4-port ADSL router, but I only see now that my USB ADSL modem wont connect to it, as it only has the rj11 c...
Summary: I have a wireless router with me, I would like to connect the router to the ADSL Router which I got from the ISP. is this possible? The ADSL router co...
Summary: Hi, I've just set up ADSL on my LAN with a router. Everything SEEMS to work fine. I'm using the router as a DHCP server and have NAT set up. I use a l...
Summary: Hi all, I have a router(Sercomm ip5050) which is used to share the broadband before. However, I want to use it as a switch and I want to use t...
Summary: Help! I've been trying to set up a network between two computers. one runs xp and the other runs 98. These two computers are connected through a rou...
Summary: Hi, I recently bought a used ADSL Router from an auction website (kinda like eBay) it works fine and everything and does what it's supposed to, howev...
Summary: NTL1991's question was how to use a wireless router as a wireless card. Can't do it unless you can find a hacked version of the router bios software t...
Summary: I am running a suse linux machine with two 3com EtherlinkIII ISA Net cards and want to use this machine as a router, i would like to know how to...
Summary: I have a Linksys 4-port Cable/DSL Router hooked up to just one PC. But I plan on hooking up a second and third PC to the router soon. When i do this, ...
Summary: Hi guys, I have recently moved and I'm connecting through my roomate's router. I own a Linksys wireless router (WRT54G or close, not sure). Anyway, ...
Summary: Right off the bat, this is a typo, so correct it. "It seems that with the DNS at 192.168.1.2 it can't even resolve the host, and with the DNS at 192....
Summary: Has any one used a Belkin F5D6231-4 11b router as an access point for an xbox? What settings are used? My system router is a Linksys 11b router and I ...
Summary: Hi all, I got a 3Com® OfficeConnect® ADSL Wireless Router and an IBM ThinkPad T43 laptop. I am trying to setup a wireless connection to the router....
Summary: Hi, I'm thinking of getting an ADSL modem/router for my new home because I'm planning on getting an ADSL connection. I'm wondering if I can use it in ...
Summary: Am attempting to network 3 computers running win 98se. Using linksys 4port dsl/cable router as a hub and am sharing one interntet connection. The inte...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
