Summary: Can someone tell me how I go about triple booting with Win98/NT4 and Win2000. I currently have Win98/2000 dual booting but have had problems getting ...
Summary: Go to c:\, type attrib -h -r -s boot.ini. You can do this from windows 2000 from command.com. Then you can type edit, hit alt, f, o, then navigate t...
Summary: I have a 20GB hard drive. I folowed a set of instructions that had me do the following: Boot with 98 startup disk. Run Fdisk and "no" to large hard d...
Summary: I did install Linux last. LILO did not recognise the win2k installation. Might be because of the presence of System commander. Even after uninstalling...
Summary: Hi everyone, I was hoping someone can help me with this one. I have two hard drives (60GB each)set as RAID Striping. Can someone tell me what is the ...
Summary: I just formatted my HD, I did have a bootable CD, but I just found out that I cannot boot win2000 from DOS. Problem is, this is a laptop, if I use wi...
Summary: I am considering trying to triple boot 98/NT/2000 on one 45 GB Hard Drive. I have been through Western Digital Support and they won't help me with th...
Summary: I hae tried to triple boot with win 98 on the c: drive using fat32, win2kPro on the d:drive using NTFS, and Winnt server on the e:drive using NTFS. I ...
Summary: How do I setup a triple boot for Windows 2000 server, NT 4.0 workstation and Windows 95a? I have drives c - 15 gigs, d- 40 gigs and e - 2 gigs. Ple...
Summary: TRIPLE-BOOT PROCEDURE: 1) Create 3 partitions on a hard disk. 2) Install Linux first. 3) Install NT 4.0 next. 4) Install WIN2k last. Note: This proced...
Summary: How do I dual boot Win2000 on my WinMe system. I have already partitioned my hard drive, one for ME and one for 2000. When I insert the 2000 cd to i...
Summary: Hi Ramiro It is not possible to boot win2000 from the dos prompt. You can not dual boot win2000 and linux. Because both have their own booting loader ...
Summary: I'm a little confused by your info: If I read it correctly, you have - two drives: Master = '98 and W2K; Slave = XP. You can only boot to W2K at prese...
Summary: Here is my situation. I've installed Win98 and then W2K on two different partitions to make a dual boot computer. Well, I'm taking a class in which I ...
Summary: Does anyone have the definitve answer on how to triple boot Win2K, Red Hat, and SuSE all on different SCSI drives? With NT4.0 it was a simple matter o...
Summary: i have problem setting up triple boot with win98,winxp and dos in winxp's bootloader. i dont have any idea why it isnt working. here is how i did it. ...
Summary: Can do this triple boot -WinME, Win2k Advanced Server.? I have heard that 2 NT kernel( windows 2000) will cause lots of problem. It is true? I am putt...
Summary: Can anyone tell me if you can triple boot 98se, 2000 pro and XP pro? Right now I am dual booting 98 and 2000 and would like to add XP. Thanks. ...
Summary: I installed SCO and after that win2000. Both installations finished successfully. When I restart my computer I get to the Unix prompt Boot: I Type in ...
Summary: You can dual and even triple boot using win98, win2000, and winXP. See microsoft knowledge base article #306559. http://support.microsoft.com/defaul...
Summary: I installed Windows 98 on my (d:) partion then also installed it on my (c:) partion. There version of Win2000 that I have only works in a Windows envi...
Summary: I have Win2000 on C: and Win98 on F:. There is only 1 main partition. The Boot.ini looks like this: [boot loader] timeout=30 default=multi(0)disk(0)rd...
Summary: You need to install win2000 first and than winME and last Linux. You can choose to use Linux lilo or win2000's boot loader. If you choose win2000 boot...
Summary: Recomendations: Create 1 primary partition drive c:=200 meg, fat16. Create drive d: fat32 win98 and drive e: NT4 NTFS on the first hard drive(split ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
