Summary: Update: I got a new PSU. Installed it. Still getting the same problem, No beep, No Post. Apparently a PSU without a fan for a year is still effecti...
Summary: When I start up the machine I get no beep, no video, I already reset the CMOS... no idea where to go from here.. freshly built, Radeon 9800 Pro GPU....
Summary: When I turned off my computer to take my lunch and turn it on again after 30 mins. there is no response at all. No beep, no display from the monitor b...
Summary: I just recently bought a new Syntax SV400 motherboard, revision 1.0. However, after installing all the hard ware, it does not boot nor post. Figuring...
Summary: I have a XP Media center PC, self built, Machspeed Matrix P4M800 motherboard socket 478 Intel celeron 340 2.93GHz Socket 478 512MB of DDR It was power...
Summary: I bought a new video card (Evga 9600 gso) to replace a current working video card (Evga 8600 gt). I dont really know what happened but after installi...
Summary: Hi, 2 months ago, when I started the monitor it showed a black screen with a letters displayed. I tried to enter to the setup but it did not recognize...
Summary: This is probably a paperweight or a parts donor, but I'll ask for suggestions about troubleshooting. No post beep, no post, the screen lights up but ...
Summary: My PC froze whilst using it. I hit the reset switch and it has failed to boot since. There are no beeps, and no video output most of the time. On t...
Summary: Currently have a 2 module ram setup, each a 128MB PC100 SDRAM module. I took a 256MB PC100 SDRAM mod from a friend's computer (it was working), and p...
Summary: I have a problem my motherboard doesnt work, it will not beep at all. here is my story. I have this extra harddrive and on it was another os which i...
Summary: Hello! I tried to switch on my PC after a week long of inactivity. It switched on, but it would switch off on its own after about three to four second...
Summary: i'm having the same problem. i just had mypc repaired yesterday and was working fine until i started to switch it on today. no beeps, no display on sc...
Summary: Hi, I have a clone computer that lthe school I went to gave me. I tried to hook it up to the internet. message error came back " not enough ram On;ly ...
Summary: Friend bought some components from a local reputable supplier and asked me to build a new system. Have done it lots of times before. On power-up, CPU ...
Summary: Ok I had no beeps no post when I fired up my machine, so since all my components were still returnable i decided to order a new mobo, ram , and vide...
Summary: I went and bought new motherboard, CPU, Ram because I took my pc into a sevice center and when they tested my power supply it tested good. They told m...
Summary: Hello , I have recently got my hands on another K7S5A, the problem is that when I hook it all up the CPU Fan spins and HDD is active but no post. I am...
Summary: My pc won't boot. This happen after leaving my pc in a room that is not heated for a few days. When I turn the pc on 4 days ago a weak battery message...
Summary: So i was remotely connected to my home comp at work today..all was fine. I came home, expecting to see my comp on. Instead, i see a blank screen and...
Summary: My computer sustained some damage a while ago which I thought was only to the motherboard. However after buying a new Gigabyte 7ZXE with AMIBIOS the c...
Summary: Hi Just got this pc. everything was fine then nothing? No post beeps it just sits there while the monitor goes into standby? Ive taken the battery out...
Summary: I've had this problem with a system which initially would not appear to boot, screen went into sleep mode almost immediately and there were no POST be...
Summary: I just put together a new computer with the AMD 64-bit processor. Nothing works of course there are no post beeps at all and there is no video but th...
Summary: I own two computers, my main one and a dedicated server. Recently my server was on during a lightning storm and after it would not POST or beep. Since...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
