Summary: I'm still trying to install a 3dfx Voodoo 3 video card (PCI) in win3.11. So far I've gotten a max resolution of 800x600 and no better than 16 colors i...
Summary: Help. Trying to install MSFront Page 2K on a Pentium 100. I get a page fault error at MSCIDEX, in the TOOLHELP.DLL file. When I tried to then load ...
Summary: I am trying to install Windows 95 on a 486 computer. Half way through the installation I get a message as follows: ERROR SU995038 'Invalid Command Op...
Summary: i am also trying to install windows 3.1.If i need dos where do i get it from and what version will work with windows 3.1.i loaded windows 3.1 and i...
Summary: I need windows 3.1 disk #6 to install a printer on a computer and printer that were given to my mother by 2 different people. I have no disks or books...
Summary: when i try to install it says cannot read ____.*** whatever file, and it stops installing and i cant get past it! Please email me with help! ...
Summary: I have a 486/50mh, 32 ram. windows 3.1 and norton desk top. I have tried to install a cd-rom(24X). I have the right drives, but when I try to start ...
Summary: I know that i should have the spec's for the pc that modem will be installed on, I apologize for not having it. Basically I need a step by step on how...
Summary: Help...I'm in over my head.I am attempting to install win 95 (on 13 floppies) over win 3.1 "without CDROM support". The edition of win 95 is the full ...
Summary: Hi everyone. Mabye you can help me out. I am trying to install a cd-rom on a 486 with win3.11. I got the drivers and installed them and changed my con...
Summary: "oemsetup.inf is different for each driver" I had the same problem trying to install a graphics card,when the disk they gave me only had windows 95 dr...
Summary: hello: I was trying to install a video card which is Cirrus Logic CL-GD5401-42QC-B on windows 95 but it did not take it for somehow. I found out...
Summary: If your mouse still doesn't work, you can try cutemouse, a good and small driver for DOS. There is a link to it in my page at the bottom of OTHER RES...
Summary: Try re-installing Dos, and then run Scandisk. You might have to low-level format the drive. What brand of drive is it? You can usually go to the maker...
Summary: A friend of mine's son was horsen around on the computer trying to make more memory by deleting things. Anyways, he deleted a little more than he sho...
Summary: I am trying to connet a old useless hp (I will use it to run old msdos games) and installed win3.1. I need access to the internet and I was able to fi...
Summary: I'm trying to install a Sound Blaster 16 on my 486SX/25 with DOS 6.22 and Windows 3.1. When I try to install the drivers I keep getting the message: ...
Summary: One of the common problems you will get once you install a new OS is that you leave a disk in the floppy drive and the bios will think that you are tr...
Summary: i'm trying to install a nic (intel pro 10 isa) in an old 386 dx running windows 3.1 windows install doesn't have my card as a choice and it won't acce...
Summary: I've been trying to install a Cirrus Logic GD5426 video card (not the same as the one in my previous post). I found the Win3x drivers for it and insta...
Summary: hello i need help installing a program "calmira" into my computer in msdos what commands do i type . i'm installing with a floppy disk in a: prompt i...
Summary: no, i tryed the iso from newdos.yginfo.net. it installed the whole /dos71 in chinese. i had to boot with a floppy i made right before i tried to do an...
Summary: HI, Im trying to install windows 3.1 along with windows 2k. But the problem is you need dos 6.2. But when I try to use a 6.2 boot or install dis...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
