Summary: So in my previous topic I did not have thermal grease. I got it, applied it correctly, and in my bios my temperatures are still messed up. But in wind...
Summary: "I am also assuming that the only limit to voltage is heat? Is there a way I can damage the CPU with too much voltage BEFORE it overheats?" The therma...
Summary: room is not same as idle... Why simply because if your computer is idling, you still consume power but at a very low power... Unless you turn your m...
Summary: I know what you're thinking, not another post about hot CPUs... but... I've done everything everybody says about hot CPUs, And I'm still running at 55...
Summary: Just a follow up havn't touched the computer since i posted.. Comp still idleing and its now at CPU Temp. External : 38 Celcius CHA Temperature : 20 ...
Summary: If you are that worried about your temperature going up, then try taking the side off and checking for large amounts of unwanted dust on the fans and ...
Summary: I still am in doubt. According to JAM the motherboard on the AMD isn't the greatest and I tend to agree since I have a MSI board now is okay but not t...
Summary: AI NOS is a good feature for inexperienced overclockers, it works similar to dynamic overclocking offered by other boards. It's aim is to monitor your...
Summary: Hi I'm still confused about the FSB. Some people use it to indicate the memory bus, some as the system bus... Can someone help me to clear this in my...
Summary: Hey guys im new to overclocking and was looking to increase my cpu speed a bit. It is currently 1.8ghz and i was looking at increasing it to around 2....
Summary: I think you are ready for the hsf reapply I am still confused abuot your cpu on die point. In your first post you called it the pci/aux temp, and th...
Summary: My current temperature of my XP 1800+ with K7AMA motherboard at 10% CPU usage is 41C with left panel opened ( Friday July 26, 2002 at 11:30mp in Calif...
Summary: Hi there shipmates, I have read loads but I am still confused ….. Help needed to O/C my Sempron 3400+ purchased recently from Dabs, installed on Gi...
Summary: Raise multiplier by 0.5 and make sure you have adequate cooling. Or you could raise the FSB and drop the multiplier. Try to get it to 300 Mhz and se...
Summary: NOTE: I know I posted in the Hardware forum. I just thought that this form would be better for this type of question so I reposted. I just purchase...
Summary: Hey guys! Im having a bit of confusion on which BIOS i need for the ECS K7S5A fro Elitegroup. On the left bottom corner of my mobo (by pci slots) it s...
Summary: Thanks for the reply. I do use my BIOS to check my cpu temps. At boot up, the cpu temp on die readings is at 52 C, but the cpu external temp is only...
Summary: Just check if the new CPU you want to use is compatible with the board and the chipset on it. Usually you also need a bios update to support the new c...
Summary: My current temperature of my XP 1800+ with K7AMA motherboard at 10% CPU usage is 41C with left panel opened ( Friday July 26, 2002 at 11:30mp in Calif...
Summary: My board is a Asus P5A-B ver. 105 128 meg of ram savage 4 Speedstar A-90 Display Sound blaster Live When i set the board to run this chip(2.2vc 100MHz...
Summary: Also i would like to keep the existing ram. And on top of this i would like to add another 512mb, 2 modules of 256mb so i get dual channel. And Also i...
Summary: Ack... I still have this problem going on. I am starting to wonder if it is the video card that is doing stuff to me? :o I heard radeons sometimes do ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
