Summary: I have a SBS2K3 server running as well as 2 other terminal servers. Both file servers one running accounting software. I cannot RDP or terminal serv...
Summary: I have 2 Win2K Servers with static ip's. Now I want them to be networked so that they can communicate. How can I achieve this? This is just a peer-to-...
Summary: I always use ris to deploy os. But after ris setup, the ip address of the client will be dhcp. Are there anyway to assign the static ip address to the...
Summary: I volunteer network admin for a combined school and church network. We have installed a SonicWall switch which does the content filtering and virus pr...
Summary: I need my Windows server to access the network by static Ip address how to set that on TCP/IP prorties I have 192.165.110.2 255.255.255.0 192.165.11...
Summary: Hello guys I have an issue, same issue both 2 DL380 G5 - Dual port Embedded NIC Cards. NIC joins point to point and tested with Network too - I go to ...
Summary: Setup: Broadband Business Cable>Cable Modem>Linksys Wireless Router>Primary Domain Server>50 Port Switch>25 Client Win XP Pro Router has the ISP’s S...
Summary: HII have a question,if i am using NAT on a RRAS server and designate one NIC as a public and the other as a private normaly i would have to have a sta...
Summary: Hi to the forum, I have been trying to sort this problem out on and off for 3 years without much luck….hope someone can help me out. I run a windows...
Summary: First day on a job and I see a new network printer setup. Instead of assigning a static IP address to the printer, he allows the printer to obtain a D...
Summary: We facing the issue when we exceed the number of IP in used. We set the IP using static IP to client and server. The IP start from 192.168.112.1 until...
Summary: I have Server2003 set up as a print server and have about 30 printers setup locally using Standard TCP/IP ports with a static IP for each printer. Al...
Summary: thanx for the link and tip. I think some of my problems are because of not knowing how to setup RRAs properly. I could never understand why the PPPoE ...
Summary: I'm having a similar problem - I was assigned a static IP address of 65.60.190.18 I want to set up the Win 2003 server in my SOHO, I have a WRT54G bro...
Summary: I have set up a new 2003 server r 2, with terminal sevices, Sql server and Citrix presentnation server 4.5. My problem is that an IP address (from a C...
Summary: I have assign no static ip to Windows 2003 server and xp pro clients..all the ip's are dynamically assign by the windows..i haven't install the DHCP s...
Summary: We switched over to TeamWifi (www.teamwifi.net) and the tech guy said our new IP address would be 10.1.16.30. Do I need more than that IP address? Ou...
Summary: Scope is activated. Clients are not getting IPs at all from server. This is a replacement server, (old one was NT4) and i've tried to keep the same s...
Summary: ************** In order to have the domain information forwarded you must have a static IP address. If you have this then you can start the fun! ****...
Summary: Im new in networking. I've question about this No-ip and DNS server that run on Windows 2003 Server Enterprise Corp OS. I've Free No-IP account since ...
Summary: We're running a Tomcat application that grabs the system IP addresses. Tomcat is installed as a Windows service and is set to start automatically when...
Summary: the connection manager that you install on remote computers is trying to connect to the wrong ip dedicated ip for server is .106 connection manager i...
Summary: Hey guys! I have a question about Ghost Cast Server. We have a network that is all static IP addresses. But I want to make our GhostCast Server an Dyn...
Summary: We have just switched over to 2003 server. We have AD, DNS, and Wins running on this DC. Before we switched it over we had it running in a test envir...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
