Summary: Hi guys. I have a network set up at my house, 3 computers all hooked up to a Linksys Router, and a DSL connection to the router. All computers are con...
Summary: I have a quick question as a newbie about networking that I was hoping someone might be able to help out with. I have recently upgraded my service wi...
Summary: Get rid of all Static IP's but one. You didn't mention what type of router your using but I would recommend the Linksys BEFSR41. Configure the router ...
Summary: I am just starting to configure firewall's/gateway's for private LAN's to communicate to the internet. There is one big misunderstanding that I have ...
Summary: I have recently subscribed to a DSL ISP that provides me with a /29 subnet and 6 static IPs. I have some servers that I would like to setup with stati...
Summary: No won't I want to do is set my router so that it will stick to one ip, instead of automatic, where my ip gets changed every few days because it's dyn...
Summary: hi, my wireless router broke yesterday, so i am attempting to connect an old laptop to my cable connection and share the connection via ICS. I have fo...
Summary: We are running static IP with 3 subnets (192.168.4.1; 5.1 & 6.1). We got a new laptop client. This user will be traveling around visiting each of thes...
Summary: That's an interesting setup and an interesting problem. We use statically assigned IP's for our PC's and DHCP for VoIP where I'm working so there hav...
Summary: My questions is: I just got an extra IP address for my cable connection. My understanding is that I hook up the cable modem to the hub with a crossove...
Summary: I inheirited a network of about 50 users and was left no network diagram. Everyone uses static ip's including printers etc... Is there a quick way to ...
Summary: Did you know you can configure dhcp to provide that static address? It's called ip reservation. You reserve that ip address by associating it with t...
Summary: I never use the wizards. You sound like you know enough just to go to the control panel and change the settings. Leave the gateway setting out of the...
Summary: I suppose you could via a batchfile if you used the netsh command. A simpler method would be to use DHCP and change all clients to get their IP's aut...
Summary: when i had just the one firewall it was able to handle my main IP and the 2 alias IP's. They have now reconfigured my circuit to allow one IP to have ...
Summary: Earlier this year I bought a wireless linksys router for my new cable connection, I formerly had dial up and used a hub for my home network of 5 wired...
Summary: Port forwarding has been setup for quite a while now. The main reason I started this topic is that it's annoying when you are disconncected from AIM a...
Summary: Hi, Right now I'm in the middle of try to set up ICS on a 3rd computer, on a network that already has 2 comps on a hub. Right now the high speed inte...
Summary: Anyone know how to create new ip's or lead me to any good articles on creating new internal ip's that will pass through the firewall? I am going to be...
Summary: If it were me, I'd pick one device to dish out DHCP. I think in this case, I'd probably go with the USR router. The USR Router should stay connecte...
Summary: If your using a router you can set access-lists, if you are using RRAS (Win2K server) then you can set up filters in RRAS that will block IP's. You d...
Summary: You definately need to have DNS in order for requests on the external (internet) side to be resolved. No resolution, no surfing. In a typical home sc...
Summary: Here's my problem, i use a hub and my isp has given me 2 different ip's for my 2 computers. because my isp is so wonderful, the 2 ips are on completly...
Summary: I have 2 NIC 's in my main computer, which is connected to the internet through a cable connection. It has currently 1 ip in-bound to its mac address,...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
