Summary: Hello, I have problem on squidguard , I set it to deny access to site , but now when I want to use it, it deny all ADDRESS for me , who can help me ...
Summary: Hi folks, FC5_64 I encountered problem on burning DVD+RW media tested: TDK DVD+RW 1-4x brand new Verbatim DVD+RW 1-4x brand new packages newly install...
Summary: Hi there, im just new in linux. I would like to start my linux in GUI, but it says problem on display. My vga card is nVidia Quadro NVS 280 but it's n...
Summary: Hi 3Dave, Tks for your advice. I have been working on GNOME eversince from lasting posting. So far not much problem found except in one occas...
Summary: I bought a Linux4Win, which compariable with win95,98,Me. I plan to install into my Sony XG38 Notebook(which have a preinstalled WinME), during the in...
Summary: Hi!, i've realised that alot of people have posted with this problem configuring the x. There seems to be a problem with the graphics card Intel(r) 8...
Summary: I have some annoying problems with the sound on my Slackware 9.1, as following: -sound works, but sometimes XMMS doesn't start playing when I doubl...
Summary: Hi Everybody, I recently installed Mandrake 9.0 on a PC to act as a file & print server on our local network and also to act as an internet gateway a...
Summary: You should try to fdisk/mbr on hda1 then you can either try and configure etc/lilo.conf and then run lilo, or reinstall lilo. I had the same problem ...
Summary: I was Install Mandrake 8.0 on my Computer befor and work with it , now I Chage my Graphic Card to ( Trident 9750 To out ) and also install Linux Mandr...
Summary: Hello , I have problem on my Cache Server , I upgrade to Linux 7.2 and want to use IPTable on it for Routing , NAT and Firewall, This is PRoblem on ...
Summary: Hi folks, Slackware-11.0 (64bit) Fail to run slapt-get Steps performed as follows; Download "slapt-get-0.9.11b-x86_64-1.tgz" on "linuxpackages.net" # ...
Summary: I have my Red Hat iso image downloaded from ftp.redhat.com. After I boot with the first installation CD, the process goes very well, but when goes to ...
Summary: Hello everyone: Kfloppy will ONLY format a disk via it when I am logged in as root.(that is fully logged into KDE as root, not just "su") If I try to ...
Summary: I installed redhat 6.2 and want to configure it for dhcp. This has never been a problem on redhat 7.x, but on 6.2, it just timed out trying to retrie...
Summary: When the firewall is launched on boot stage 1 or 3 fails - meaning the other 2 also fail. However the same commands (extracked from the startup log) e...
Summary: hello I have been working on RedHat 9.0. I am facing a problem in configuring my n/w card. I use netconfig and assign the ip 192.168.1.100 to eth0 and...
Summary: I have a Conexant PCI 56K modem on my computer and I want to make it work in Linux. I am using a Debian dist. with a 2.2.16 kernel, named Storm Linux....
Summary: I have installed RH Linux 7.3 on my system successfully but it is not detecting my modem which is 'motorola sm56 speaker phone(internal)'. I am using ...
Summary: Hi Actually there is no problem in configuring dhcp and email service on one system(Red Hat Linux). DHCP: this service can be installed thru rpm util...
Summary: Hi All, I'd be very grateful if somebody could help me to detect/solve problem with serial M$ InteliMouse... I tried cat /dev/input/mice cat /dev/psau...
Summary: Hi folks, RH 8.0 I encountered problem is connecting USB wheel mouse to a 6 feet extension cord. I tried both optical mouse and mechanical m...
Summary: I am having problems getting my display to work properly on my HP Pavillion n5240 laptop after installing Red Hat Linux 9. The OS recognizes my s3 Sa...
Summary: David, You're not the only one. I successfully installed WinLinx 2001 with Windows 95. No video problems indicated on configuration. WL 2001 Support ...
Summary: Hello Everybody. I installed printer (SAMSUNG CLP-500) on Linux and shared it in network under Samba. I want to use this printer from other machines, ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
