Summary: I am trying to play "Under A Killing Moon" but it won't recognise my soundblaster card. As far as I know it's a Soundblaster 16 or PCI something, anyw...
Summary: What does this mean? I am trying to get a modem going on an old ps/2 & when I try to dial the number it gives me the error, Serial Port Not Detected. ...
Summary: I got this sound blaster pro sound card from a Computer surplus store. Did not come in a box or anything just was thrown in a box with some other used...
Summary: formatted HD and reinstalled 6.22 & win 3.1 but cd not detected. Want to install win 98upgrade. Can someone tell me how to do this? Thanks to anyone...
Summary: You have to tell DOS what drivers to load, it doesn't really 'detect' - as mentioned in your other post (Soundblaster not Detected) in config.sys devi...
Summary: I only have one drive and the IDE-controller is on the motherboard. I found out that it helps, if the drive is not detected, to turn the computer fast...
Summary: Hi, I am using MS DOS 6.22. My Modem is US Robotics V90 Voice/Data/Fax modem (model 1749). It is on COM 3 base 0x3e8, irq 5 as seen in windows device ...
Summary: thank you for your suggestions, but neither of the articles you listed answer my question, because I do not have any trouble booting my operating syst...
Summary: Hi, I am using MS DOS 6.22 . My Modem US Robotics V90- Voice/Data/Fax modem (model 1749) is on COM3, base 0x3e8, irq 8 as seen in windows. However al...
Summary: Hi, I had some problem in running scan disk on my Windows95 machine. It tried to fix a file with longer name and failed do so and asked use scandis...
Summary: I formatted my hard drive (had NT 4.0 earlier on it)using FDISK in 98 bootdisk. I deleted the C drive partition and recreated it. Now my hard disk has...
Summary: I have an older DOS machine with a CD-Rom drive. The CD-Rom worked fine, until I reformatted. Since I reformatted, it will not detect a CD in the driv...
Summary: you can not detect hdd config from outside of bios. take your drive and put it into a computer with detect capability, and get your parameters from th...
Summary: Please help. I just got my soundcard in I bought off of Ebay. It is an old soundblaster Isa Card dated 1991. It did not come with a manual or anything...
Summary: Subject: BIOS wont detect hard drive and CD-Rom Body of Message: Hi, I recently came home after a week vacation to find my computer not turning on. A...
Summary: I have the windows 98(se) setup cd, and the boot disk, but it will not detect the cd drive, the system I have is a 586 @ 200 mhz with a 2.? gig hd, an...
Summary: {the old post did not help bu thanks}I just put this computer together. it is an pentium 200 mmx with 64 mgs of 72.pin EDO memory. I have 2 hard driv...
Summary: Hi, I am writing a cd application with batch files and I need an automatic routine to detect what drive has an audio cd or skip if not detected. I am ...
Summary: These have been copied from previous posts , overkill I know , but should have everthing covered . no keys-------------- Go to start, run, type in m...
Summary: Hello, I'm currently having a great deal of trouble getting some of my old peripherals working on an older computer I am building, and I can't figure ...
Summary: Hello, I own an old Olivetti 286 PCM which has a 40mb HDD. The problem is that the system doesn´t detect the hdd. in the BIOS you can select the hdd ...
Summary: you COULD have created for yourself one or MORE of several problems. FIRST, the fact the the bios detects or does not detect the cd drive has NOTHING...
Summary: NT systems have the %OS% variable set by default to 'Windows_NT', and non-NT systems don't. So, if you just want to act depending if the OS is NT (Win...
Summary: okay this is my problem .. i installed dos drivers for my creative sound blaster . when i didnt need to now i get on start up , error memory manager n...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
