Summary: Will CD Right! 1.1 or 1.5 work on an NT 4.0 box? Sony Hotburn doesn't, and this Spressa CD burner is just sitting here pissing me off. Everytime I try...
Summary: Is it possible to install base NT 4.0 with an AGP card on a clean machine (no other OS)? If you don't have service pack 3 or above, will the machine ...
Summary: When I reboot my system, as I get to the Win NT 4.0 desktop top I receive an error "can not attach CDUCF.SYS to driver." Any help would be appreciate...
Summary: I need to install infrared ports on my laptop running with NT 4.0 service pack 3 (to be connected with my cell phone Nokia 6110 and Data Suite 2.0. Ca...
Summary: I've got a PII 233 MHz with 64 Meg RAM and a 10 Gig HDD. It currently has Windows 2000 Pro installed and working fine. I want to be able to dual boo...
Summary: Gigabyte GA6VX74X mainboard and NT 4.0 SP6a. A stop event is logged and is as follows: Event ID: 4 Source VIADSK Message: "Driver detect an internal e...
Summary: I have used that NIC in at least 3 dozen machines and have also seen that message in one and only one computer. It is also an NT 4.0 computer. Howev...
Summary: I have a problem. I have two partitions c:, which has a fat16 partition that has win98 and NT 4.0, then I have d: which is fat32 which holds my data...
Summary: I have windows 95 and NT 4.0 server on my computer. I have tried to cofigure the modem for RAS. I have Amquest HCF56SP modem and installed the propter...
Summary: I have read that there are tools available (on the NT Server CD) to administer NT 4.0 from another machine on the network, which run under w95 or NT w...
Summary: I have Windows 98 and NT 4.0 installed on seperate physical hard disks on the same computer. The NT drive is installed with FAT for compatibility reas...
Summary: I have a dual boot system with Win 95 and Nt 4.0. I would like to remove the Nt 4.0 and leave my system with only Win 95. Would appreciate any help o...
Summary: Travis- I was wondering if you had any luck finding the driver for this Nic. I'm trying to dual boot with windows 98 and NT 4.0 but I cannot find the...
Summary: I am trying to get all my hardware on the Sony PCF-F540 working under Win NT 4.0. I downloaded a NeoMagic256AV+ video driver off IBM support and it wo...
Summary: I have been promised a Thinkpad 755c. Nothing do I know about it, other than 755c's have eiter a 486DX2 (50mhz) or 486DX4-75mhz processor (she has not...
Summary: I'm running windows nt 4.0, but i want to upgrade to windows 98. I have the windows 98 cd-rom. But i have to install from DOS or windows 95 and i do...
Summary: Just brought a brand new shiny Segate ATA-66 EIDE 17.2 Gig disk and thought I would install NT 4.0 on it instead of my more usual Win 98. Placed it in...
Summary: I want to install NT 4.0 on my old computer. the problem is that the CD-rom does not have an ATAPI driver. So I can not install it. I think the only a...
Summary: Here we go: I have Site A that is a PDC NT 4.0 and Site B that has a BDC NT 4.0. Both sites have wins and mac services installed. Both sites is unde...
Summary: Does anyone know the procedure to install an internal IDE cd-rw with Windows NT 4.0? I believe I have the hardware connected properly, but NT is not ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
