Summary: We had a DELL PowerEdge 2400 Server, shipped with two PIII 866MHz CPUs, 512M memory and two Seagate SCSI HDs. We want to build a FTP server, but SCSI...
Summary: Hi all folks OS:- RedHat7.3 =============== I am preparing to experiment the setup of software RAID 5 using only 3 hard discs. Any folk on this board...
Summary: Hi, When i try to install RH 7.3 on my box with software raid the install freeze near the end. I have try without raid and with a 7.2, there is no pb....
Summary: Software RAID / accidentally raidhotadd to wrong md Issue summary: Had problems with 1 of a 3 drive software raid array. Harddrive is not physically ...
Summary: Got a bit of the problem with the resources used by Red Hat 8.0's software Raid solution that makes the system crawl like a turtle with constant heart...
Summary: Hi ! I am using Red Hat 7.2, just recompile kernel 2.4.18 in one harddisk. Now after my newly compile kernel, I add in another new harddisk so that I...
Summary: i am trying to build a RAID system for just learning purpose .. i thought i would start with RAID 0 and later try RAID 1 and 5 .. i have 2 hdd's of sa...
Summary: Hi, try: http://linas.org/linux/Software-RAID/Software-RAID.html Look at the Introduction section aswell - there are additional links (about 10 links ...
Summary: Hello, I tried to install SUSE Linux 10.0 Eval on my system but it doesnt detect my HDD which is software RAID configured. I m using Intel 82801 SATA ...
Summary: My motherboard had some power problems and seems to have short circuited. I have 2 HDs on software RAID 1 in linux that I would like to recover data ...
Summary: I am trying to get a software RAID working on RedHat 7.0, but I seem to being having some problems. When I attempt to make the raid( mkraid /dev/md0 )...
Summary: The distro you found is Slackware based, which is good for slow hardware, but you really should get more RAM. As far as I know XFree86 requires at lea...
Summary: without a doubt is the cd check the greatest advance in OS's to date. redhat 8.0 installs smooth and without a glitch. if you like me and buying more ...
Summary: Linux supports software RAID. You probably want to get a newer version, though, because software RAID is a pain to set up manually. RedHat now has RAI...
Summary: rsync should do everything you want, with the strong encryption of an SSH tunnel and compression capability. The only thing it doesn't do, and I'm not...
Summary: newer versions of redhat or mandrake should have software raid options when formating. if you have a newer MB you will also ahve a hardware raid optio...
Summary: What will it serve? Just for backup? If so then there will be no problem using it for multiply tasks, like firewall, dhcp, routing, etc. If you had a ...
Summary: I have a similar problem but use lilo. My main computer is running Mandrake 9.0 and I am going to try to set-up some diskless workstations to do littl...
Summary: I recompiled my kernel.. 2.4.5, and compiled raid1 into the kernel, (not as a module).. Anyway, I have set up a raid1 system, as per instructed by so...
Summary: Hmm. Installed 2 180Gb WD caviar and made a software raid. When I mounted the it seems like Linux stole about 47Gb from me... /dev/md0 330G ...
Summary: You could use either software raid, or a logical volume manager (LVM). Personally, I would make do with a 20gb /home though! Alternatively if you coul...
Summary: Where do I go to view the contents of a CD-ROM drive. I have a CD-ROM drive and a HP burner. When I try using the software Manager to install software...
Summary: Hi, Right away, Yes, this is most probably caused by u're ATA RAID array. Most RAID arrays I know of in motherboards these days are software RAID arr...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
