Summary: I have a 100Mbps NIC on my laptop. I'm connected to my LAN via a hub that supports 100Mbps NICs. My lan is only a 10Mbps LAN. When I look in the Netwo...
Summary: Hi, Im a webdesigner and I need to test my pages on a 56k bandwidth. I have highspeed internet so that presents a problem. I can't get a free isp in m...
Summary: Hi, I have a PC with windows 98 SE installed and it really slows downs on start up, or just running programs, or refuses to load programs sometimes wh...
Summary: Hi everybody. Please I'd like you to help me understand what's happening in my network. Maybe some of you have suffered a similar problem. I detected...
Summary: A 10/100 router connected by CAT 5e wiring to each PC will give you up to 100Mbps on each port so the router itself won't slow down either connection ...
Summary: Hi, just wondering if any of you have this problem. PC A has a Linksys NIC with Win98se installed and PC B has an Aztech (NC2100 using Realtek chip) N...
Summary: I recently installed a Linksys router to my network. After setting up the router I tried to log in. The log in was VERY slow and also any network ...
Summary: The server should be connected to switch, and the two hubs should also be uplinked to the switch. Make sure the one hub isnt uplinked to the other hub...
Summary: Hi ddimitrov, Last week we had similar discussion (http://computing.net/networking/wwwboard/forum/20721.html). The consensus is that it does not look...
Summary: I have a G network card in my laptop all linksys. My friend brought over his linksys B card in his laptop and my windows xp said it was only connecte...
Summary: I am going to purchase another ip address so i can use a hub uinstead of router(so i dont have a firewall) and i was wondering if i used a 10 mbs hub ...
Summary: I have a broadband cable connection. This is the only computer connected to it and has an 10/100Mb ethernet card. After I totally formatted the hard d...
Summary: Does enabling WEP on a wireless network slow down the transfer speeds? If so, is there a speed difference between 64 bit WEP and 128 bit WEP? ...
Summary: We have a LAN at our office consisting of about 50 computers connected to each other through HUBs. Our office start at 9:30 am. It works ok. But from ...
Summary: Hi I bought a ethernet hub almost a 1 1/2 ago and i think it seams to be slowing down... it's rj-45 with 5 ports and 4 in use and all cables are cat5 ...
Summary: i have just setup a local network with two machine hooked up to a router. since then my bt client seems to slow down my machine after it was running f...
Summary: I just set up my home networking. My brother and I are on LAN. He like to download things using Kazaa. When he is downloading, my internet usually slo...
Summary: I have a linksys WRT54G router, of which I've had for 3 years. Never had a problem until this past week. Recently I decided to drop my cable internet...
Summary: Given that there are approximately 12 bits sent for every byte (8 bits) of data sent, you are getting about a .4Mb/sec transfer rate (2,097,152/60 x 1...
Summary: Hello.. My network at school has just had the main server upgraded from NT4 to 2003 by contractors. Before the upgrade the network used NT4 and opera...
Summary: I have a Compaq with 1 - Gilat SkyBlaster Adapter and 1 - Gilant Skysurfer Adapter Type 5. I'm running Windows ME. My problem is I can not get a NIC...
Summary: Individual network cards can slow down a complete network. Cards blinking in and out. One situation I had was tracked down with an expensive little ...
Summary: If you want a NIC that is affordable and hassle free try using a Linksys products. If in case you're having problem with it, the technical support pe...
Summary: we connect through the internet through the server. before the host info was set on the computer wrong but i reconfigured it so it. when i reconfigure...
Summary: matt start with your basic. find out what is causing this. plug in your dsl modem directly into the computer. does it still hang or does it run fine. ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
