Summary: Hey people, I'm making a little server thing for me and my friends to play L4D on (a 4 player zombie game) and i was looking at Shuttle's KPC 45: http...
Summary: hi can anyone tell me that how much maximum processor support my system. i have already tried out p4 2.4 ghz but it is not supporting. and one more th...
Summary: hey guys i need some help, i have recently just purchased a Gigabyte GA686LX from ebay.ca. I have am building a computer with the following spe...
Summary: Hey everyone, i am building an Athlon system for someone and i want to know if the motherboard i have (ecs k7sem) will actually support an athlon xp 2...
Summary: Hey everyone, Wow, thanks for all the feedback. Super useful! I took every single piece of advice into consideration, and these are basically the ch...
Summary: i just bought the msi k9n4 sli-f socket am2 and i was reading the processor support and it says Athlom 64: 3500+ and 3800+. HEre is a link to the mo...
Summary: hey guys. my mobo model is 370SWT with intel810L chip set. the processor support is Intel 370-pin Pentium III FCPGA/ Celeron 333 ~ 850* MHz. it runs a...
Summary: Hi, I just purchased a new motherboard (Shuttle AV41P) and processor (Celeron 2.4ghz). I put them both in the computer and attached everything inc...
Summary: OK... As far as "biggest bang for your buck" I would do something like: 1) EPoX 8RDA+ nForce2 Motherboard THIS BOARD HAS IT ALL. Latest Athlon pro...
Summary: I had a new build system it was running well for almost a week, but today after a half hour of using it, it just collapsed and can boot up anymore, it...
Summary: Get the motherboard manual from ECS and see what it says about processor support and detection during initial boot. The fry's link says it supports p...
Summary: i have an old pc which p3 processor which has 20GB hard disk. recently it is damaged can i replace it with 80GB hard disk and if replace it with...
Summary: There is no such thing as dual channel ram. The motherboard is the thing that supports dual channel processing. Any two identical sticks of ram of sui...
Summary: ...if the Shuttle AK39/N motherboard supports Athlon T-Birds? I would assume it does being that it's a Socket A mobo, but I rather know for sure than...
Summary: Hi guys, im pretty new here... i recently received a new computer as a gift. it has an ASUS P5P800 mother board in it. IT says it supports a whole loa...
Summary: Unless you really need the BIOS update (system instability, additional processor support, etc) I'd avoid flashing it. Also, if you do go thru with it...
Summary: it appears your cpu 2000 xp is to big for the bios, sad but true, dont throw it out the window just yet take the cpu out and ram sell the board on eba...
Summary: "Intel El Paso 2 Motherboard Form Factor microATX (9.6 × 9.6 inches) Processor Support for an Intel Pentium 4 processor 400 MHz system data bus M...
Summary: That voltage upturn you did was some serious damage, especially to the floppy. Probably made things worse. A bad Power supply can produce the symptoms...
Summary: I am wondering I have a P4 running at 533mhz FSB and have a board that will go up to a 800mhz FSB and processor support. I just bought some 400mhz mem...
Summary: what bios reset jumper??? i am about to just throw the hoole thing away lol.....i dont understand why the AGP video card does not work on that new mo...
Summary: Sorry guys, but it looks like I have another question for you. I've notice on a lot of MoBo spec's or info I'm seeing this next to processors support...
Summary: The specs on this mainboard show processor support for Intel Pentium(75-200mhz) Cyrix 686 (P120-P166+ mhz) AMD K5 (PR75). Hope this helps. Good Luck. ...
Summary: I checked MSI website, to look up processor support for my mobo. The chart on the cpu support page says a Duron 1.3 Ghz {100 x 13} is NOT supported, b...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
