Summary: I am trying to set up two devices on my home office LAN with static IP addresses to the Internet so they can both be accessed from outside my LAN. One...
Summary: I am having some difficulty setting up a lan using only static ip addresses. I have two computers they are almost identical. One running Mandrake...
Summary: I have a linskys router in my home. I recently got a surveillance hooked up to use while i am away on vacation. The IP address changes all the time ...
Summary: Great, thanks for that paulsep. It looks like the application is using port 1740. Here's what I've done so far: 1. Set up static IP addresses. 2. Se...
Summary: Yes, that is the product. They will help you with the software for the time clock, but they state they will not help you with setting up the ip addres...
Summary: Mate has his own small buisness & is tring to do it on the cheap via me , I previously set up his network 10 pc's all connected back to a patch panel ...
Summary: Hopefully someone can help me. I work in a school and we run a network for which we have 2 static ip address ranges. We have only been using 1 range a...
Summary: Hello, Current setup is a desktop pc and a laptop sharing a dial up connection. The desktop being the host with win xp pro installed. At the moment gi...
Summary: Hi, I just installed a surveillance camera at my house. It came with software that sets up a web server that makes the camera accessible through the ...
Summary: hello. this is probably a really stupid question, but i just cannot get this to work for me. first, i'll detail the hardware involved: motorola s5100...
Summary: Here is the situation: I have no access to the main router/switch (dont have the username/password and resetting it is not an option). All of the ip...
Summary: Theres this VPN software which can allow me to create a VPN with each other. Now, I am trying to bridge 2 NIC's and I came across this in the manual: ...
Summary: You set the gateway address and subnet mask in the same place you set the static IP address. The gateway address should point at your router. To be s...
Summary: Most ISP requires that you use dynamic IP address for connection - unless you subscribe to expensive static ip address connections. Which is your co...
Summary: We have recently got DSL. We have 5 static IP addresses. The provider had me setup an addhost to the router which give me a 192.168.254.1-5. Now our n...
Summary: I have 2 networked pc's both running XP pro and networked together. My problem is when i enable ICS on one pc the Network ip address changes to 192.16...
Summary: I have a cable modem. static IP address, win98, 3com NIC. I keep losing network connection, IP adress gone (static), I try to ping other machines noth...
Summary: This may sound daft, but I'm trying to get an Broadband ISP, the only local one to me, says for $34 a month I get "1 Static IP address" does this mean...
Summary: so I'm curious as to why we have to use ip addresses when it's set up here IP addresses are required in order for devices to communicate over a networ...
Summary: I think you have found the best resource on the net. All that you have suggested is possible. The easiest way to share a cable modem is through the u...
Summary: If you're trying to set up a connection between the two machines (ie not to a router or access point), for file/printer sharing, then I believe you mi...
Summary: I have an XP computer at home and one at work, the work PC is connected to a small network with a Dlink 504 router/ADSL modem. I want to be able to se...
Summary: You have a minor problem here with the other computers grabbing your fixed IP address and using it. You would have to set up your server to only use t...
Summary: I have a quick question as a newbie about networking that I was hoping someone might be able to help out with. I have recently upgraded my service wi...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
