Summary: You actually dont need to do any of this. Just have to forward port 20,21 to the machine that hosts the ftp server. For now, lets forget the dyndns pa...
Summary: Hi everybody! I am trying to set up a FTP server at home. Currently, my machine is behind a router that is connected to the internet and I am using a...
Summary: How can i set up a ftp server for the internet while being on a LAN? What i mean is, every ftp server that i try to use gets my local address instead ...
Summary: I want to know how to set up an ftp server. what prog to dl? and how can someone connect? i'm going to look it up on the internet now but i just want ...
Summary: about the firewall, when u set up the ftp server or anything that is going to connect to your machine, makes sure you have the other user in the accep...
Summary: I have two comps connected in a network with NTFS. I already set up the port forwarding to allow port 21 to 192.168.1.100 (the server using MIIS 4.0 r...
Summary: Hey. I have been trying to set up my ftp server under windows IIS for qquite a while. I set up the virstual server in the d-link router. After a while...
Summary: This is my first attempt at setting up a network (LAN). Currently I have a wireless network setup so that I can share internet between the computer w...
Summary: Hi, I'm having a hell of a time trying to set up a webserver using IIS in XP. Everything is fine until people try and access the server where I can s...
Summary: I have registered a domain name through easyspace.com and now wish to set up a server using apache to run the website from my Winxp system instead of ...
Summary: I am currently attending college at which I am connected to the internet through the schools network. I was wondering if it is possible to set up ano...
Summary: I want to set up a webserver using win 200 server. I have a linksys router and what i want to do is somehow open a port up on the router so i and oth...
Summary: I am having some difficulty setting up a lan using only static ip addresses. I have two computers they are almost identical. One running Mandrake...
Summary: You should be able to use any brand name for the wireless network cards - I installed a LinkSys card in my daughter's PC, and it works fine, even thou...
Summary: You could set up an FTP using a program like Serv-U. It's very easy to set up and you only have to open port 21 (or whichever port you set it up to u...
Summary: I hate to ask what is probably a simple question, but after days of forum searching and hours upon hours of tweaking I still can't make this work. I h...
Summary: Im not sure of your particular ISP and their brand of modem, but, yes. You will have to determine if you have a dynamic (continually changing) ip add...
Summary: I tried to reply to a similar message in dated in October but was apparently too old. So, any help is greatly appreciated. I tried to send the follo...
Summary: Hey all. I installed IIS onto my Win 2000 machine, hoping to try and get an FTP server up and running. I was fooling around with the Personal Web Man...
Summary: "Wake on LAN" sends a "magic packet" to each machine on the network and if that machine has the right ID number and is WAL enabled it will boot up. Y...
Summary: "Thanks, that was virtualy worthless." Wanderer has replied to your post, but in his usual meekness and diplomacy in such matters, through a third pa...
Summary: how do i set up my ftp site so i can use its bandwidth for running a ventrilo and/or sof2 server?? i got full access to the site and i got cpane...
Summary: Hey all. I installed IIS onto my Win 2000 machine, hoping to try and get an FTP server up and running. I was fooling around with the Personal Web Ma...
Summary: Hi people, I hope that someone of great wisdom can help me here. I am hoping to be able to set up my home PC (running WINXPPro) as an Email server for...
Summary: I used the Linksys Home Networking in a box. 2 PCI NICs 10/100, 1 10/100 switch, 2 15' Cat5 cables, and all the software and instruction to set up a n...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
