Summary: My computer won't boot into windows, the operating system is messed up, so i bought a new ATA HD to copy the files from the old SATA HD and then i wi...
Summary: Make sure you got the IDE cables set up properly as well. Ive noticed on occasion this can cause your bios to not even notice the drive. The jumpers ...
Summary: Hi. I'm not very good with computer hardware so I was wondering if you guys could help me and understand what my problem is. My computer is a dell xps...
Summary: Im trying to format my inlaws HD on my PC . The reason being theirs had a regular keyboard , meaning the round type plugin .But it got broke off where...
Summary: There is nothing wrong with trying new things at all..As a matter of fact I encourage it.. Raid set-ups are nothing to be scared off if configured cor...
Summary: Hi all, I was wondering what the best method of transfering HDD ATA to HDD SATA? Would cloning/ghosting be the best way? The setup I have now are 2 H...
Summary: I am helping set-up testing equipment to perform various cognitive testing. The set-up will include four touch screens in one room with a second ro...
Summary: That depends on exactly what you are trying to achieve. Do you want only a local network or are you looking to have shared internet access? If you hav...
Summary: I'm new on this board, so please be gentle with me all you highly experienced sorts, but I need some quite basic advice. Please understand that I am ...
Summary: Going to buy stuff this week, I need opinons though! ECS RC410L/800-M 2.0 Socket T (LGA 775) ATI Radeon XPRESS 200 Micro ATX Intel Motherboard http:/...
Summary: operating system XANDROS hi, ive recently had to restart my eeepc 900a netbook to the factory settings. I had to create a new password when it was set...
Summary: or just install the sata and 1 ATA, then copy the ATA over to the SATA and do the same with other ATA drive then yank the old ATA drives. now yer all...
Summary: Hey guys, I need some help and advice. Lately, I've vebe having some problems with my 160GB HD. It may have been damaged a little internally.. or have...
Summary: Hello! So, i've been slowly updating my computer as i go along, with new pieces of hardware. It reached the point where i felt my hard drive was bottl...
Summary: Ok, I have 2 hard drives and 2 CD drives. I have the HD on one IDE cable, and the CD drives on the other. I wanted to put them so that the cables were...
Summary: my computer running windows xp on ide hard drive. the other days i decided to buy two hd from a friend that needed money. turns out it was two sata 16...
Summary: I know this is a late message but I have the same p4s8x motherboard and just ran into the same problem. Some SATA drives need a jumper that limits the...
Summary: I would suspect that may be the issue. I would recommend that your drives be set up this way. Primary master - Boot HDrive, primary slave - CDRW, Se...
Summary: Hi, Im here once again bit ive nearly finished setting up my new computer. My problem now is that the HDD wont install XP. I think this is due to no...
Summary: i think this will answer my problem from my previous post.. can you slave a scsi to an ide? can you do the other way around? if i have 2 HD and a CDRO...
Summary: Hey--If a mobo will support ATA HD will an SATA HD also be supported? How much difference between the two types? If you find you're going 'round in ci...
Summary: Your setup is good. See the post just after this one for more info. Once I set up a CDROM with my Master HD on the same IDE channel. Couldn't figur...
Summary: Hi All. Right now I have a Western Digital Caviar SE 120GB w/ 8MB cache. It holds XP Pro, Games and data files. I had a Maxtor 80GB HD w/ 2MB Cache. ...
Summary: I am having some problems with a Serial ATA HD. Formatted, 2 partitions, loaded win xp on it. Fine, all working, for a few days.... until... Suddenly ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
