Summary: Netlogon is posting the following error in the system log upon boot up of the DC: "Dynamic registration or deregistration of one or more DNS records f...
Summary: I am facing the following issue with a w2K Server with Abit KT7A-RAID mother board. The board has two I/O RAID ports controlled by High Point HPT370 c...
Summary: I had the same problem when trying to network a winXP machine to a win2000 advanced server machine ,,, UNTIL!!! I set up my network with static IP add...
Summary: when I log on to windows, it says there is a configuration problem, click ok to start the instalation wizard. when I do this, it searches for new har...
Summary: I am trying to install W2k on a AsusA7V m/b with Promise ATA100 controller. I have got past the HD controller driver install, partitioning etc, but wh...
Summary: Hi All, I just installed Windows 2000 advanced server on my pc and have no idea at all what to fill in ip address,subnet mask, default gateway ,primar...
Summary: I've got a big problem with my ISDN Adapter. It is a external ELSA Microlink ISDN Internet on serial Port. I think it is only a configuration problem,...
Summary: I restarted the server after automatic configuration of DNS for Active Directory Service, and since then it is just stuck on the windows desktop and s...
Summary: I am trying to install the ISA server on win2k Machine. After installing the server in cached mode I am able to access the internet from the server ma...
Summary: having problems configuring my network card with windows 200o professional amd k62 500 linksys fast ethernet 10/100 adsl with earthlink i see the mode...
Summary: I had a few problems with my W2k Server and fixed almost all, but this one concerning the DNS. When I run netdiag I get the following output: ...........
Summary: Hi! I have a problem with win2k Server. I have installed T-DSL Protocol and I have configured Routing and RAS with the NAT interface. The problem is, ...
Summary: I have installed windows2000 server on my machine. after the successfull installtion. By runing DCPROMO, I have configured the Active Directory. Try t...
Summary: This is my configuration: My server configure with Active Directory, DNS, DHCP, RRAS, VPN. I used modem dial-up connection to connect to the Internet....
Summary: You need to confirm that with Excite Tech Support if they allow it's users to be their own DNS. If so, all you have to do is register your Domain name...
Summary: One step at a time... First, do you even have a DNS server? If so, adjust the settings there. otherwise you'll need to look into HOSTS or LMHOSTS file...
Summary: Hi guys. Im trying to set up RAS access on a win2k server. Every time I try to dial in from a remote computer, it wont let me log on, keeps asking fo...
Summary: My PC is on a local area network with win2000 server running on the server. The problems I am having now is that even when the server is configured to...
Summary: All of the above could be a problem especially your DNS settings. However, here's a crack at one other possible problem. If you are running Windows 2...
Summary: Hi, I justed finished configuring my Windows 2000 Server. I can view my default webpage locally in my Home LAN, using the computer name as the URL. Ho...
Summary: I'm running Windows 2000 Advanced Server and I use it as an application server. I do all my work remotely through Terminal Services. When I connect to...
Summary: Hi, I am having problem with Port mapping with Terminal services, We are using a software which use LPT port for printing. Whenver our client co...
Summary: I connect two computer (win 2000 server and windows xp as client) by crosscable and ethernet. I tried to connect them by assigning them static ip addr...
Summary: Thanks; I forgot to mention that I did ping the loopback on the server and it was OK. I will try changing switches. There is no patch panel being used...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
