Summary: Hello, I am Telneting in to a UNIX server on a PC and would like to send files to the serial port on the PC via the Telnet UNIX session. Can anyone g...
Summary: I recently received some barcode scanners that plug directly into a serial port, such as tty/b01. I read that I can disable getty, make a node and op...
Summary: I have an SCO OSE 5.0.6 with serial and TCP/IP connections. Suddenly today, the serial connections quit working. A user was logged on, but when she ...
Summary: I am working on the somewhat new IEEE 1451 family of standards and have decides to use QNX as a simulated NCAP (network capable application proces...
Summary: check out your tty settings on the unix box and see if they match your hyperterminal settings. you can do that through smit or other management tool o...
Summary: Hello everybody: We are a driver developer group for various serial devices. One of our problems is about SCO UNIX operating system. In one of our...
Summary: I want to connect a digitiser ( weighing m/c with rs232 port) to tty1a on unix system. I want to read the data sent by the digitiser Any help please ...
Summary: Elmer, I mostly do this on SCO UNIX. If what you are calling a HUB is a true Network Hub you cannot do this. You can attach your modem to the comput...
Summary: hello, i azrol from malaysia. i had a problem to declare the comport.my problem is, i have a reader for smart card in serial port using rs 232,the rea...
Summary: Is there anyway to enable both serial port and console access simultaneously? I've never seen it done but I've been told it can be accomplished. Norma...
Summary: We connected a dumb terminal to the DIGI-NEO port with flow control disabled on this terminal. -Output with CAT test.txt > ttynnn results in receivin...
Summary: Hi Mike, Make sure your parrallel/serial ports are configured. Use scoadmin and go to printers. Configure your printer by putting a unique name and li...
Summary: hi, anyone knows how i can parameter a distant matrix printer connected via serial port under an ibm aix risc. it's not connected in local. thanks ...
Summary: Almost certainly, you have a dumb terminal and the of the two parallel ports one is likely a 25 pin serial port. It has no OS. It is used to connect t...
Summary: i have the same problem as you i have a U.S. robotics 56Kvoice pnp and i'm unable to make it work you must at first the configuration of your modem is...
Summary: I am a new Unix user.I have FreeBsd 4.5 on my computer.I would like to connect a console cable to my router and the serial port of the computer..Which...
Summary: I've never worried about unix compatability and external modems. Almost anything can be made to work on Unix. But first!!! There is a service access c...
Summary: You don't need a modem driver as such, so long as your kernel is compiled for serial port support, you should simply be able to dial out using minicom...
Summary: Another option is to add a Stallion Easy Server II to your remote site. It has both an ethernet port and serial ports. The Pc.s can attach to the eth...
Summary: I have the a system directing its output to a unix X-term continously (from serial port) in run time , I have account to the workstation which contain...
Summary: Have a look at hyperterminal for dumb terminal emulation over a serial port. You may need a null modem adapter. What OS is having difficulty with the ...
Summary: I'm an intern at a company that recently aquired another business that ran off the HP-UX 10.20 unix platform. They (and myself) do not have any experi...
Summary: Also, these are on a digi in which the command mpi seems to allow me to configure ports. However, the F key that says to save config changes is F5 an...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
