Summary: Hi I have a user who bought a 80 gig hard drive and he split it into 3 partitions which worked fine. Then he made a 4th and after doing this he now ge...
Summary: ok, i've had windows 98 on my computer for about 3 years and have never had this problem, i just recently installed linux. my disks are setup so that...
Summary: Hi everyone I have to state beforehand that I'm quite a novice in informatics field... Problem: Philips Internal CD-Rewritable (16x10x40, drive interf...
Summary: So a few months back, I took my DVD burner out of this computer to put it in my other one. It works fine in my other computer, and used to work fine i...
Summary: ok, when I have second device (DVD) connected to secondary IDE onboard controller my WinXP hangs there and will not go anywhere (primary on that chann...
Summary: I did!? haha oh man...what a dummie I am! alright I defaulted the bios and it just doesnt recognize the 2 hard drives BUT it does recognize my 2 cd dr...
Summary: Running a 80GB HDD (Master) and CD-RW (Slave) on Primary IDE, for some reason my CD-Drive (Master) on Secondary IDE comes up with "device not connecte...
Summary: Hi I have this problem with my PC that's drives me nuts for some time now. The Specs of my PC P4 1.8G Asus P4S333FX Mobo 512MB Apacer DDR400 Ram 40GB ...
Summary: Check the connector for the secondary IDE on the mobo. Possible one of the pins is bent. Sometimes one is missing, but that is correct as some interf...
Summary: My secondary IDE is not being seen by widoz, and if there is a device (cdplayer) connected during bootup, my pc hangs up. When there is no device boo...
Summary: That's how I started out. I have had 2 cd burners runnig on this same machine with no problems. I took out a cd rom and left in a cd/rw on the second...
Summary: Dumb question but have you jumpered your CD-Rom from slave to master ??? If yes first recheck your CD-Rom if it still works. Reinstall it as slave to ...
Summary: Hello all. I am trying to add a second hard drive (1GB) into my dads computer for him as its quite an old computer and he only has a 3 GB drive at pre...
Summary: I need some help with an old Pentium 200. I've got enough parts to use as an e-machine. To get enough hard drive space I'm using a 1 and 2 gig drive ...
Summary: when i boot up this computer i was building, it says Detecting...... No device is found! Bios is not installed. I changed the operating mode from R...
Summary: There are two sata (raid)drives in this machine. No ide. Not that I know much about this really. I also don't know much about promis controllers so I ...
Summary: I have the same problem with Audigy 1 and 2 cards on a variety of Intel and Athlon motherboards with different chipsets. The drivers can be installed ...
Summary: Well how am I supose to explain what a beep sounds like? It just beats once in awhile... inside my computer itself beeps, not like a wav sound. But I'...
Summary: It is model #LXR-40122A. I have already downloaded the driver and it will not install. I tried it on another computer and it worked fine, I didn't eve...
Summary: I just put together a brand new computer using the Asus p4s8x motherboard, and I can't get the secondary IDE to recongnize anything. I tried both the...
Summary: AMD XP 2600, Soyo KT400 Dragon Lite MB, 256mg PC2100 DDR, Geforce3 Ti200. This system will not install an OS. Xp will hang everytime at the "Startin...
Summary: Here's the deal, I just got a Xaser III tower case. I put my ASUS P4S333 mb into the case and the secondary ide show no drives. I have tried everythin...
Summary: My cousin's computer has some problems. His computer boot upto the windows boot screen and after this, a blue screen and the error message up just for...
Summary: I'm using removable hard drives on my systems. My systems are dell optiplex gx270 with p4 processor and 1gb ram running windows 2000. Just recently i ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
