Summary: Older NT 4.0 will not recognize most of Adaptec's stuff. Below is Adaptec's SCSI driver/adapter url for download. http://www.adaptec.com/support/ove...
Summary: jopa: NT is a little difficult to load scsi hard drives. You will need the scsi drivers for your host card on a floppy. Now using the three NT Boot Di...
Summary: I have never heard of CD ROM drivers for NT. If it's a SCSI CD ROM, the native SCSI driver for CD ROM's is loaded, if it's E-IDE, native ATAPI driver ...
Summary: I accidentally removed the SCSI driver for my CD-ROM from the SCSI applet in Control Panel (Duh!) Now, of course, NT doesn't recognise my CD-ROM. And ...
Summary: i have to install a hp surestore 6020 scsi on a windows nt 4 machine. hp doesn't have the drivers for download. does anyone know where i can download ...
Summary: I am looking for DOS driver for SCSI DOS driver for Archive Python 02779-XXX tape drive. Check everywhere. Possible: it did not exist. This is my last...
Summary: I need drivers for the HP SureStore T20i (internal/scsi streamer with travan tapes) for NT Server 4. Didn't find nothing on the HP-Homepage. Does anyb...
Summary: I have an old Digital server I am playing around with. I need a driver for a scsi controller - AdvanSys ABP-9xxU Plug and Play PCI to SCSI bus master ...
Summary: Copied from previous thread... Occassionally, you'll need to load your SCSI drivers at the beginning of your install. This is done using an undocument...
Summary: If you have not already installed the pnpisa driver for NT Server, you can find it on the installation CD. Then, if your SCSI card is plug and play, ...
Summary: does anyone out there have a driver for win 95 or NT 4.0 or has it and can email me it for this SCSI card? angain it is the TMC-1660. please email...
Summary: Need urgently NT driver for NVIDIA GeForce2 Go 16 MB for ARISTO Rapid. NVIDIA doesn't provide the NT driver for its own stuff ! Isn't it stupid? Can a...
Summary: Depends on what you mean by "see" the card. NT isn't plug n play, so obtain the proper driver. Go to display in the control panel, settings, advance...