Summary: have you edited the autoexec.bat to see if an execution line refers to this history volume at c: c:\edit autoexec.bat. if its there, remove it, save ,...
Summary: O.K. I've gotten around the sound blaster issue by disabling 32 bit in the BIOS. But still contending with the STOP error history volume not mounted. ...
Summary: I'd hold off on the 'highscan' option: "On some computers, specifying this switch may have no effect or cause EMM386 to identify upper memory areas as...
Summary: Hi, James, Unfortunately, the seller tested the memories in my own computer. I bought the memories with the intention of testing them, because it seem...
Summary: The Doofus, Old Jake, Thank you both for your rapid response. I tried the website and the nearest version I can find is 4.0.9.1.(Nero40.exe), whic...
Summary: Hi dc: If you have a sound card & software installed, then I believe that you should have a sound folder in Program Manager. There should be a volume ...
Summary: hi gaby :) click on the link above; it will take you to the soundblaster homepage's driver page. the second file is what you want "called sbbasic.exe"...
Summary: i have a ess audio drive 1688 sound card installed in windows 3.1. I have set the volume to the highest level but its still not that loud. im usin my ...
Summary: Hi Richie: Your PC should be able to mount a standard CD-ROM drive in the 5.5" floppy bay. There are 2 types of cases that I know of (1) where your fa...
Summary: How do I make a Boot Disk on WIN3.1 I have a Disk Image Utility but I am use to win98 words not the old terms. Also how do I control sound volume? I j...
Summary: Although I am not experienced with win3x (95 and 98 mainly),...I am sure you cannot get the system to partition the hard-drive with FAT32...and if you...
Summary: i insalled a Interwave sound card in a compaq 386 running win3.11. after installing the driver and reboot i get this error message. Interwave envirom...
Summary: I had a serial mouse which stopped working, I have obtained several ps2 mice which work on ps2 ports but not with any converters i have tried. Is the...
Summary: Hi Lila: If these sites show in history section, then someone has been to these sites, can't say weather or not it was your boyfriend. You should also...
Summary: I have a 3.1 box, and the floppy drive will not work. I have switched out the cable, and the floppy drive, and it still will not work. It was working ...
Summary: I encounter similar problem after installing Works 3.0 on Win95 machine. History: - created c:\windows\command\share.exe as a Notepad-file with j...
Summary: HHEELLPP!! My Windows for Workgroups 3.11 setup disks are not being recognized by my computer in setup. I get to an A:\ prompt and type SETUP for disk...
Summary: I'm having the same problem that another user was. Our office laptop when booting up stops with the error - Unable to control A20 line! XMS Driver no...
Summary: I have this old 486 cpu running win 3.1 and everytime i try to run win it shows the 3.1 screen but stops and says, "executable not found" i know the w...
Summary: Hi Perry Snow: First if you type win at c:\ (c:\win), then you should start Win 3.1. When in Windows go to File Manager, & find sysedit.exe in windows...
Summary: hello fellow computer techies, i'm ruuning a intel 386dx w/win3.1 and dos6.22 operating system. the machine only has windows and wordperpect install o...
Summary: I agree... Gordon, stop boasting... I have XP Pro too, wanna know where it is? Sitting in a case in a carosel gathering dust. Of course I can't bring ...
Summary: I've had Windows 3.1 roughly eight years, and two years ago, the paintbrush program stopped allowing the use of color, saying that there was not enoug...
Summary: Go here for how to make sure your data cables are right: I assume you have an IDE CDRom drive, and it isn't more than 5 years old or so. The rules for...
Summary: Have dl that version you said from the site you gave andit will not load It stops at the lic. agreement. What do I have to do to get it loaded? THAN...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
