Summary: Looking for info on wether or not i can download SSE for my CPU-AMD [model 4],Socket A[socket 462],Mobo-Biostar M7NCD [no-ultra,pro.]my MMX,MMX+,3DNow...
Summary: hey i wanna overclock my vid card, i alrady have a Vantec Spectrum Fan Card, for cooling is this enough or not, i wanted to get also a heat sink for t...
Summary: Can anybody tell me if the P4 Prescott 2.40E supports HT technology or not? If possible please provide link to information about this CPU which clearl...
Summary: Hi Is this strange or not, when I run a FSB of 199 everything is fine, if I run it at 200, I get minor data corruption, ie. progs. stop working and ne...
Summary: my 3000+ modle 10 barton @ 2167mhz is at 65oC medium load is this ok or not seems prity hot to me but the old amds wher hot runers so i dont know any ...
Summary: Hey, I was wondering is this Motherboard good for overclocking or not (MSI 845 Ultra-C) And on some sites I have seen that this mobo supports P4 fro...
Summary: I'm afraid to do anything with multipliers or increases in FSB because of my temperature problem (which I am researching right now) I've read all over...
Summary: I just installed a new XP 2400+ chip onto a Leadtek nforce2 board. I didn't unlock the chip, but it's letting me change my FSB and my cpu clock speed...
Summary: Well if you got an Athlon processor running at 2.4ghz and a Celeron running at 2.4 ghz or even a Pentium 4 running at 2.4ghz then there is no contest ...
Summary: I have a very old Packard bell legend 70cd with a pb540 motherboard and a processor speed of 75mhz. The bios is Ami 1.00.12.bb0r. Thinking of getting ...
Summary: "P4 1.6Ghz or AMD equivalent with SSE" Doesn't matter if it has SEE or not. The 1.2GHz Duron doesn't come close to being the equivalent of a 1.6GHz P4...
Summary: Normally the ram controller was build into the northbridge so the data had to go through it between Ram and CPU. The difference with the Athlon64...
Summary: So here I was reading up on this new Dual Core Pentium 4 processor and found myself at a cross roads. By the looks of the Pentium D benchmarks on a fe...
Summary: XEON? Its entry server/server processor just like MP is. They allow for DUAL CPU or more support just like MP is. They are slow and doesn't take adv...
Summary: Max. xp 1800 die temperature could be 90C or 95C. If you get below 50C that's great, 50-60C be cautious, above 60C - you have to do something to decre...
Summary: I have an Athlon 1.2GHz right now, and it will overclock to 1.47GHz. I am thinking about geting a 1.4GHz(the highest my MOBO supports) and overclocki...
Summary: The real benefits of ocing your cpu & ram are..you get some things done like 5 sec faster,you might get 10 or 15 fps more in some games. so you only s...
Summary: Hi im new to this n not sure if im doing this right or not but i have a question. im running a Asus P2L97 Mobo with a 233mhz 66.8mhz fsb slot 1 p2 cpu...
Summary: I have 2 roomates. We all have computers. All are conected to a Lynksys DSL/Cable Modem Router, which is conected to the cable modem supplied by Time ...
Summary: Hi, If i over clock to far, my computer will go in an endless loop of restarts. I found this out the hard way. I had been running my comp at 2.02 ghz ...
Summary: O.k. Here's the deal. I recently ordered, for a new build an AMD athlon 64x2 5200 Brisbane CPU, ECS A 780GM-A MOBO, Aptivia 680 Watt PSU, New SATA dri...
Summary: Hi, My CPU is XP 2100+ and i ran the computer for about 1 hour or so and i checked the temp of the CPU. It says 46 degrease C/114 degrease F. Is this ...
Summary: It is customary for the poster to keep checking back to see if he gets any free help or not. Requesting an email is like going up to a woman at the ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
