Summary: Hi, can anyone lead me in the right direction to find the latest scsi drivers for RH . Specifically looking for DLT8000 drivers for linux. Found nothi...
Summary: Well, it sure as hell won't be able to find the drive if it doesn't find the bus. Try a copy of Redhat 6.2 or Mandrake 7. They both have a ton of sc...
Summary: hi,all: I had a scsi disk array. And there are 2 channels. After I install my OS redhat linux 7.2, the computer can not boot up with checking sc...
Summary: Hello All, i am new to linux, when i try to install it from CDs it asks for installation media and then it ask for scsi driver and giving me a list. i...
Summary: On an old Acer AX6B+ motherboard equippped system that has an onboard scsi controller but no scsi drives or other scsi devices - I have tried RedHat 6...
Summary: I installed new release of Redhat linux (8.0) but it doesn't recognize my Adaptect AHA-3940 AUW SCSI card and it says "Kernel Panic!!!". What should I...
Summary: I've been informed that the problem lies in the backup software I'm using. The software is Yosemite Tapeware, which works great, but it grabs and hold...
Summary: Hi I want to install RedHat Linux 6.2 on a server that has an IWILL Side-DU3160 SCSI card (qlogic ISP12160A chipset). The card is certificated by RedH...
Summary: I am using Mandrake 9.0 along side Windows 98se on a Pentium III machine with 256Mb of ram. During the installation of Mandrake, I opted to lea...
Summary: The reason you cannot find the file xconfig is because it doesn't exist. If you got to /usr/src/linux and type: make xconfig what it does it executes ...
Summary: I changed my grub boot loder as you said. hdc=ide-scsi hdd=ide-scsi but up to now the problem haven't solved yet! root@localhost root]# cdrecord -scan...
Summary: you don't need an initrd if you have your ide hard disk (or scsi) drivers compiled in the kernel. Initrd is an initial ram disk which the kernel mount...
Summary: okay, here is the error message I get when I try to record a CD: cdrecord: For possible transport specifiers try 'cdrecord dev=help'. cdrecord: For po...
Summary: Hi, This document i´ve found, works on my presario. I hope it works on yours too! excuse my english and good luck!!! COMPAQ PRESARIO 1200-XL110&111 ...
Summary: Whoa! I'll try to answer as many q's of u'rs as i can. I don't really understand the user thing and why it doesn't allow u to logon with that user. Th...
Summary: Hi, everybody! I tried to install red hat linux 7.3 on my computer and at the very first stage of the installation (booted from red hat installati...
Summary: I really hope someone can solve this problem for me. I have two CD-ROM drives (one a burner), both mounted and accessible... except I can only copy 1m...
Summary: check to see if your scsi drive is supported in the RH7.2 distribution. most probably not! if so, get scsi driver and load it before installation. you...
Summary: Thanks. I just added that line at the end of my lilo.conf.anaconda file. When I tru cdrecord -scanbus, here's what I get... [root@tmri-sdlinux drews...
Summary: so it is clear now, you did not make an initrd :) an initial ramdisk is used to provide device access for the kernel with device drivers that are bui...
Summary: I'm trying to install Mandrake LINUX 8.1 onto my Panasonic CF-62 laptop. When it's searching for the SCSI drivers it can't find my cd-rom. The screen...
Summary: Hi All Guys I have Gcombust newly installed on RH7.3 which has an IDE CD-Writer and an IDE CD-ROM When I started to burn a CD-RW, following warning...
Summary: Something's wrong with the world today I don't know what it is... Acttualy I know what it is but I don't know how can I resolve it. Here's the problem...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
