Summary: I formatted my hard drive and have an HP Internal HP CD writer that is attached to a SCSI drive but I don't have the driver for the SCSI drive so my O...
Summary: I recently installed a spare Adaptec 2940UW SCSI controller and IBM HD into one of my spare boxes, running an Intel D815EEA board. The board POSTs fin...
Summary: you'll need the driver diskette for the SCSI controller card that your cd-rom is attached to. When the NT installation starts to load files, hit F6 in...
Summary: Win98 boot disc came with SCSI drivers for the more common SCSI cards. I'm pretty sure the ME boot disc would come with them also. This leads me to be...
Summary: I am getting a No SCSI devices detected error when booting. I installed third-party SCSI drivers. The CD-ROM appears to be finding the Hard disk but a...
Summary: mscdex.exe will not work with this CDROM drive since that is for ATAPI IDE drives only. The CDR-H93MV drive works with a special SCSI interface on the...
Summary: Yes and no. It's doesn't work like that exactly with a controller card. Your bios will see that there is a controller card and in the boot settings yo...
Summary: I have never messed with SCSI b4. I work for a computer recycler and can do anything with just about any computer, excepts macs....lol...but in my fir...
Summary: Well, you stated you installed Server 2003 from the CD. I assume the CD was recognized in the BIOS at that time. Isn't there a boot option to boot t...
Summary: I have installed a RICOH MP7060S CD RW which connects through a ACARD SCSI. It is recognised as CD ROM but when I try to burn to it I get a message th...
Summary: Chuck- The problem is with loading the right drivers during a clean install. Load the wrong one and the data gets scrambled across your array. Don't ...
Summary: I would partition & format with DOS. Then when you start the XP install, watch for a prompt asking if you need to load SCSI drivers. M2 If at firs...
Summary: Hi lorraine. Was it advertised as a SCSI drive on Ebay? I see some Sony SCSI external drives listed there today. If so, you need a SCSI card and SC...
Summary: hi when you try to install your raid card put your raid drivers on floppy. when you boot from xp cdrom in begining on botom of screen you can read typ...
Summary: Hello. I have recently bought an Abit NF7-s V2.0 motherboard and a 120GB seagate barracuda SATA hard drive. I'm having some problems getting the drive...
Summary: I do apologize for ever sounding short here in this thread. I was getting a bit nervous of not being able to do this tonight. but I just found the s...
Summary: update: Looking at the Device Manager for my hard disks, my slave drive is running through a SCSI controller card. WDC WD16 00JB-00DUA0 SCSI Disk Dev...
Summary: sorri but i didn't kno there was a hardware forum... ok so i have the microtek scanmaker E3 (scsi). and the thing is, the scsi driver is installed. ...
Summary: Well, Windows don't recognize this new technology so you have to install drivers by yourself. First go in the BIOS and enable S-ATA identification. Th...
Summary: My PC is continuoulsy facing SCSI Driver problem. The configuration is as follows. AMD Athlon64 3200+(socket 939) WinXP Professional SP2 ASROCK K8Comb...
Summary: Had a loook through my old posts and found this ...hope it helps ..... Here is a definite solution : Why do I get the message "data is invalid" when ...
Summary: connecting to sata requires you download raid array drivers from the motherboard driver disk, boot with windows install disk, and when the disk asks f...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
