Summary: Danny - thanks for your help but the fact that my computer will not identify the cards is not irrelevant and I understand the difference between NT an...
Summary: NT4 SP4 NT4 crashs when i try to start it with a SCSI card and a pinnacle PCTV card. I think it's an irq conflict... But i don't know how to change th...
Summary: I know enough about SCSI to be dangerous and so I'm asking for help. I have a Pentium computer running a 233MHz with MMX, Windows 98 2nd Edition, bui...
Summary: I have a NT4 Server that has 6 SCSI HD's, and i'm running out of space!!! Can I install another scsi card and add more HD's ?? so i can add another 3-...
Summary: Hi, I am not able to record sound using Creative Sound Blaster Card AWE64 (16 bit audio) in Windows NT. The driver is installed properly in Windows NT...
Summary: I have Windows NT 4.0 and Sound Blaster 16. Windows sounds work ok, but when I try to run DOS games on NT (like Doom, Wolfenstein etc.), there are no ...
Summary: I know this is a really thick-sounding enquiry, but I need to get a SCSI card to go in a Gateway 2000 PII to run an Epson scanner and a Yamaha CD-RW -...
Summary: Hi Guys, Why won't NT4 SP6 detect my PnP PCI sound card and LT winmodem while it see's my AGP vid card OK?? I have installed the drivers for the mod...
Summary: I have been searching for Sound Blaster Vibra XV 16 PnP (ct4170) drivers for NT 3.51 and I find nt 4, win 3.x, and 95+. Would the NT 4 driver work? 3....
Summary: NT sets no specific limit as such on the number of sound cards you can use in a single system. However, there are plenty of other factors that can li...
Summary: hi again. because i don´t copy to the cd the instalation of the nt4, my pc stops every time. i fix it. i have a creative sound blaster awe32 (which n...
Summary: I have a board with a onboard SCSI, and I am also using a 2940 ultra wide PCI scsi card for back up devices, the onbaord scsi runs my hards drives. wh...
Summary: Heya. I'm running windows 2000 and there aren't any win2k drivers for Sound Blaster Pro (by Creative Labs). Thus, I need the SBPro NT4 drivers (*.in...
Summary: You must load the Adaptec scsi drivers into NT. You bios may find the scsi Zip drive but the operating system doesn't even know there is a scsi host c...
Summary: Hi, I have Video Action (which only runs under Winnt and needs a SCSI card) and want to keep it going (don't ask me why, I just have a soft spot for i...
Summary: I am trying to find a drivers for adaptec aha-2940u/uw dual scsi card, I have checked adaptec, dell and drivershq in my search. Anyone with anyideas ...
Summary: Happens with nt 4.0/sp6a on boot if any scsi device on chain is powered on. scsi card is fireport 20 and has latest driver. Have proven it is not h/w ...
Summary: I got that problem at least once. I think it isn't coming from SP4. It has something to do with either incompatible or extra SCSI DRIVERS. I new insta...
Summary: Just added new hard drive (18GB SCSI) because old hard dive full (now have 2x scsi cards). Want to make new hard drive primary drive and have clean in...
Summary: Upon boot, you need to go into the configuration utility for your SCSI card and have it determine the right size and format it. You may need to ...
Summary: I am having Adaptec AHA AIC 7880P SCSI card with with RAM. I dont have drivers for that. I downloaded 7880 series drivers from Adaptec site. But, it i...
Summary: I have a workstation that will not see the scsi scanner attached to it. The driver is loaded for the PCI scsi card, but NT doesn't detect the scanner...
Summary: Sorry to sound stupid, as NT is not really my field, but does the BDC's hardware has to be identical to the PDC ? I meant like down to same make of SC...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
