Summary: RAID 0 is where two disk are used to store data. The data is shared between the two disk thus speeding up operations as half the data is written to o...
Summary: I've seen this Problem on the forum before, but haven't seen a satisfying answer to go with it :) I have a Biostar P4VTB Motherboard with serial raid....
Summary: Right now, I have all my IDE slots filled up. (2 ports, 4 devices) I want to add another harddrive. But I wondered could I have SATA and IDE at the sa...
Summary: I have an old PC with no CD/DVD/BluRay drive at all. i transferred the old PC's HDD into my newer PC. The old PC runs off of IDE ONLY. My new one has ...
Summary: I have a setup where I have one IDE drive, and one SATA drive. I have had no problems whatsoever with them working together. They were automatically d...
Summary: I think it may depend on whether you use hardware or software based raid. I only use hardware, and I have both a SATA and IDE raid array. I can't co...
Summary: It doesn't, most transfer rates are at 66mb. The 2 most important things in a HDD is the cache size and rpms. Since almost every desktop hard drive ha...
Summary: Guess it depends on how you are set up. There really isn't much of a difference between SATA and IDE really. If you are using the SATA drive as your ...
Summary: After much trouble I decided to try a clean install using only the SATA(N) drive. I booted up in DOS, checked that drive C was the first SATA partitio...
Summary: My main HD craped out on me and instead of replacing it with the one they send back, I'm going to upgrade it. What I want to know is; Is there a big ...
Summary: I bought a new computer with sata HD. i've installed my old IDE HD. the bios recognized it, and so the WinXP. the problem is, that after i turned off ...
Summary: I have a Dell Dimension 8300, with a 120GB Maxtor HD installed, which uses a SATA interface. I'm currently trying to install a new 100GB Maxtor HD, b...
Summary: I have an ASUS A7N8X-E Deluxe motherboard and need to know if I can use one SATA hard drive and one IDE hard drive at the same time. Thanks. Thanks, ...
Summary: Yesterday I Installed a New Maxtor SATA drive in my son's computer (a new MB from ASUS). I also installed a used 40 Gig ATA IDE that I formatted to re...
Summary: Hi, I want to use a SATA hard drive and two IDE optical drives on my new rig. What is the best configuration, in terms of primary channels and master/...
Summary: Ok, here is my problem. My harddrive went out on my other computer, so I decided to get a faster harddrive. I asked around and someone recommended a...
Summary: I was wondering if I've used all my primary IDE and secondary IDE connections. The problem is that because there's one HD and one DVD ROM on the seco...
Summary: i need help, is there any difference between the sata, ata, and ide connecters, i am about to get a new harddrive, and does all types of hard drives h...
Summary: iam increasing my hard drive space. currently iam having 120gb ide samsung, and iam planing to buy 320gb seagate 16 mb buffer sata 2 so can i add ide ...
Summary: I just bought a new barebones system and I need to have my old IDE hard drive because that is where my windows xp is located. I also got a new SATA hd...
Summary: Hey everyone. Just trying to research here whether or not we can achieve a RAID 1 between a SATA and a PATA Hard Drive. We have a computer with impor...
Summary: "but I obviously can't do this if my new PC has a ATA Serial interface right?" Why not? I've done it! Look at my spec! Serial ATA is in ADDITION to yo...
Summary: The SATA and IDE drives are independent of one another. Forget that SATA is there and set the IDE like you normally would. Be sure the IDE contorller...
Summary: I was wondering if I could setup a system with two EIDE HD on the primary EIDE, a DVD/CD-RW combo drive on the secondary EIDE and a third HD as a SAT...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
