Summary: I need a driver for my SATA card and I cant find it. I got the card from a friend. I found the card @ this web address http://www.shopampm.com/product...
Summary: Hi, Im here once again bit ive nearly finished setting up my new computer. My problem now is that the HDD wont install XP. I think this is due to no...
Summary: Im not sure if this is the correct forum but here it goes. I have an Asus P4P800-E Deluxe motherboard. Two harddisks, 1 SATA w/OS and 1 IDE w/data. A...
Summary: Im not sure if this is the correct forum but here it goes. I have an Asus P4P800-E Deluxe motherboard. Two harddisks, 1 SATA w/OS and 1 IDE w/data. A...
Summary: I'm think your Intel chipset has native SATA support. You need to set the BIOS settings in an IDE compatibility mode is all. I have read that WinXP ...
Summary: I need a sata driver for a Samsung HD082gj hard drive. I haven't been able to find one on the 'Net as of yet. I want to do a dual boot XP/Ubuntu on th...
Summary: I`ve read much of the info but didn`t find answer to my problem about installing SATA drivers. Everything look ok. I press F6 during setup inicialisat...
Summary: Nothing to do with my post below. Just bought a new WD Caviar 160gb sata http://www.dabs.com/uk/channels/components/harddiskdrives/internalide/product...
Summary: The SATA drivers are on the disk but they are not installed with the other Motherboard drivers. The SATA drivers need to be installed prior to bootin...
Summary: For Gigabyte GA-8KNXP: Iīm going for a clean install on WinXp with one HDD (WD 200gb Sata). And I canīt fint the sata drivers to put on a floppy! So t...
Summary: Hi Folks, http://www.asus.it/support/download/selectftp.aspx?l1_id=1&l2_id=10&l3_id=23&m_id=1&f_name=Sii3112RAID_1281.zip~zaqwedc Try this. It's a now...
Summary: I am installing a Gigabyte GA7N400PRO2 MOB. This has a Silicon Image 3112 SATA chip. Board is capable of SATA RAID. However, I am only installing 1 ...
Summary: cases4 First let me give you a tip. All your responses after the original post can be edited. So you can add to a response if you wish. Now to try a...
Summary: Your motherboard should have come with a driverdisk that has the SATA driver needed by XP Setup. Press F6 when prompted and load up the required drive...
Summary: Don't unplug your slave drive. You may need to change some settings in the BIOS. Be sure the SATA controller is enabled in the BIOS and do not set a...
Summary: There are a number of issues at work here. Win98 can't access a HDrive larger than 137GB and the SATA drivers need to be installed prior to the OS. ...
Summary: The SATA driver needs to be installed before entering windows. When booting you should get a screen instructing you to hit F6 if you need to install ...
Summary: My issue here is past threads that indicate there may be an issue using the SATA controller with one drive as the boot drive. This counters what the ...
Summary: If the SATA drive does not show in Disk Management then go to Control Panel> Add/ remove hardware and have Windows search for the SATA controllers. Y...
Summary: As strbux stated you need a 3rd party raid controller. BIOS does not recognize SATA drives when used off of a PCI card. It looks at them the same way ...
Summary: i have the p4p800, (not deluxe, but basically identical) and i run the two SATA hard drives in a RAID 0 (striped, shared data) installing these was ra...
Summary: Your mboard has two drive controllers that support both SATA and IDE. One is Via and is built into the main chipset - if you have the Via main chipset...
Summary: If the loading screen says it's atapi then that's what it probably is, although I too found references to SATA. Generic IDE/atapi/ATA drivers like th...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
