Summary: Hello. I would like to put another HD in my pc and I would like it to be a SATA drive. But I need to buy a SATA controller, and I'm not sure which one...
Summary: Thanks for the info Michael. The MB is a Foxconn 6150K8MD-8ERSH. The nvidia sata controllers support RAID 0,1, 0+1, and 5 with 4 SATA ports so I ass...
Summary: I have several SATA HDD's plugged into my motherboard via two SATA controller cards. 1. Promise SATA150 TX series 2. Promise SATA300 TX4 The elder c...
Summary: Do I need a SATA Controller for my HDD? http://us.st7.yimg.com/store1.yimg.com/I/directron_1760_399252472 Or is it enough to connect the HDD dyrectly...
Summary: Just picked up a WD Raptor Hard drive and I am trying to figure out which SATA controler I should plug it into. My Motherboard has SATA RAID Controle...
Summary: ".though sata devices are still recognized by the BIOS" If the above is the case then it isn't the motherboard that is your problem. It may be a sett...
Summary: hi all, the saga continues! i bought a new SATA hard drive to replace my old one (which was not SATA), as well as the necessary pci controller, power ...
Summary: sata hdd connected to sata port 0 cd-rom/cd-burner on ide 1 cable, master/slave internal zip on 2nd ide cable as master. the sata controller will not ...
Summary: hi where do i get the driver for sata controller. because i buy neo b2200n, and i want to install a windows xp, but its always say there is no disk i...
Summary: "...I am currently trying to reinstall windows and boot up the raid drivers." Did you already have Windows installed on this SATA drive, or is it stil...
Summary: The SATA drivers and utilities access the SATA controller, which controls the sata ports on your motherboard. You can't use the drivers/utilities to a...
Summary: Dunno. If you're talking about the difference between using an onboard SATA controller Vs. a PCI SATA controller, both use the PCI bus anyway. SATA ...
Summary: The first question is? is the SATA card/chip capable of being a bootable device, if so the when installing XP you need to hit F6 at start of install a...
Summary: 1. How much difference between SATA and IDE? All data on your computer is encoded in bytes (byte = 8 bits). Parallel ATA or PATA (you call IDE) send a...
Summary: To connect SATA drives to your motherboard you need SATA connectors on it. They don't fit to the old ATA connectors as the SATA connectors are a lo...
Summary: I'm taking from the previous posts that your SATA controller is built into your motherboard? If so, the first thing I'd do is check the mobo manual an...
Summary: What is the best possible setup for an Asus P4S8X motherboard with: 1 Serial ATA hardrive 1 ATA133 hardrive 1 DVD player I'm thinking of buying the ne...
Summary: I'll soon be installing a Seagate SATA drive on an Asus A7N8X-E deluxe mobo. In order to boot from the SATA drive, I know I must press F6 to install ...
Summary: Response #7 will work if the SATA drive can't be accessed in Windows but is seen in the BIOS. If the drive isn't spinning up then the only option mig...
Summary: Just the mainboard and the hard drive. Also you might want to get a power supply that has built in SATA power connectors, these are required if you wi...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
