Summary: I've been trying to set up an advanced connection, when I try to I get an error message saying that the Routing and Remote Access service is needed, s...
Summary: first of all, i have an ethernet card, and a 56k card. if i go to start, settings, then to network connections. then click to create a new connection....
Summary: Hy, i'm from Romania and i need to configure a internet conection trough routing and remote access in a school, so the problem is that the routing int...
Summary: I have a VPN connection set up through Routing and Remote Access, connecting to another company. Have never had any problems with this connection unt...
Summary: I set up Routing and Remote Access on a computer with 2 NICs so that I create a firewall between my network and the Internet. Now, I am having a BIG P...
Summary: Ok, let me start out by saying, I am SICK of opeining port 1723 and some other random ports on my Linksys WRT300N Router, which NEVER works. VPN Keeps...
Summary: I read somewhere that I can install IIS services from the Windows 2000 CD - Installing these services would allow me to configure Routing and Remote A...
Summary: I want to setup NAT (Network Address Translation) on the Win2k ADV Server. So win2k will take packets going to port :3389 from NIC1 on internal IP ...
Summary: I have setup windows 2000 server as a router and it is doing it's job nicely for the network. The only problem is it's also acting as a remote access ...
Summary: The following problem has perplexed me for the past two days, and it may very well be impossible to do what I am trying to do and I just don't know it...
Summary: ignore the last guy... configure the w2k server using rras (routing and remote access) as a vpn. pptp is the easier to set up, but doesnt provide enp...
Summary: If you have XP, you can use Remote Desktop, which comes with XP PRO. You will have to type the ip address of the router and the RDP port (3389), like ...
Summary: We really need more info than that. But if you are setting both of them up and are dialling the Win2k server directly. Either install a DHCP service o...
Summary: someone pls help me on this routing i have 2 NICs in server A. i want to make the server as a router. Now i can ping from the server to outside which...
Summary: I need to figure out how to set up a VPN, I have configured everything in Routing and remote access, but how do you let certin people see a specific f...
Summary: Hey guys, This is getting so frustrating because it worked when i first set it up but not now. Its a bit hard to explain but ill try =D Heres the sce...
Summary: Hi, I have had three PC's (w2k and XP) hooked up to a Cable modem router accessing the Internet for well over a year with no problems. Problem is, one...
Summary: RRAS stands for routing and remote access. You can't route with one nic or one subnet. This is a good place to start http://technet.microsoft.com/en-...
Summary: Hi, I recently added my other pcs to domain. The domain has internet conection through other network card. I enabled routing and remote acess on domai...
Summary: First try to use the net helpmsg command at Command Prompt: type net helpmsgand the number of the error. Diagnose problems through event viewer. Check...
Summary: After a dark night of the techie soul I would have to echo your frustration. I have been trying a thousand different configs at home. This problem ...
Summary: Hey everyone. I have a win2k server, and used to have my bigpond cable connectd to it, then routing and remote access setup as a NAT server. Then i go...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
