Summary: I have a DHCP router , connected to 2 machines , solaris and windowsxp , this router has a printer port , the name of my router is Siemens , here is a...
Summary: I have recently bought an external tape drive which has both scsi and paralell port connections, and I'm trying to connect it to backup a Sun Ultra5 w...
Summary: In this case I can only suggest one thing: Set your java http server to run under an unpriveleged user, but run it on say port 8080. The run a NAT tra...
Summary: After read this article, donot know which step should be done on client and which should be done on the server, could some one instruct?? SunOS 4.X/...
Summary: Well, this printer is not a PS (PostScript) Printer. So, direct printing of graphics is not possible, except text. As HP Deskjet Printers are PCL prin...
Summary: I have 4 pc's connected to a netgear router. Each has been assigned a static ip. The routers wan port connects to a cable modem and gets its IP by DHC...
Summary: I recently connected my Sun U10 to the adsl line here at home. Since I am also running a couple of PCs on it as well, I'm using the Linksys router (4...
Summary: Hello, What I am trying to do is access(FTP or Telnet) my Ultra5 box from work. I have a linksys router 4 port asigning ip's (dhcp) to 3 of my ma...
Summary: I am trying to connect my Ultra 30 to the net. I have a PC connected to PacBell DSL, using a LinkSys router (and DSL modem). I like to connect my Ult...
Summary: This message is for beginners who don't know where to turn to get Solaris installed on their x86 machine. WRITE TO ME DIRECTLY if you need detailed i...
Summary: Hello, I'm a complete newbie at Solaris 8 and just started learning 2 days ago. Right now I'm using my Win XP to write this message. I connect to the ...
Summary: What is a good location to find print drivers for Solaris 8? I have a Canon S300 printer and for the life of me, I am unable to find solaris drivers ...
Summary: It seems that our parallel port goes into a sleep mode. In order to print to our printer the server requires a reboot and everything seems okay then ...
Summary: Log in as Super-User & open the console window. Type 'admintool &' without qoutes at the # prompt, then click on Browse -->printers, then click on edi...
Summary: can someone please give me a detail instruction on how to install a network printer in solaris 8. The printer is physically connected to a ethernet p...
Summary: This message is for beginners who don't know where to turn to get Solaris installed on their x86 machine. Send your return address to me at: michaelj...
Summary: Hey guys & Gals, I have a miniature network in which I have a win2000 box acting as a router, firewall (WINRoute) that is providing internet to my x86...
Summary: I can't get into the Sun E-450 using ssh or telnet. I get a connection refused like port 22 isn't open. I don't know very much about unix type command...
Summary: Hi, I need help configuring my Sparcstation 10 to use my Cannon printer through my SMC7004ABR Barricade router. I am using Sun 5.6 for my OS. I can n...
Summary: Janob, I tried changing the port number on the /etc/services to another number not listed on this list, I can access the ftp from within the LAN with ...
Summary: I am setting up an Ultra 1 with Solaris 8. I am trying to figure out how to print to a Epson printer connected to my Siemens speedstream 2623 router....
Summary: I'm running Solaris 7 with the SunPCI 400MHz card v1.2.2 of SunPCI on an Ultra 10. Under Solaris 7 with the admintool I've configured the parallel por...
Summary: NOTE! Contact me directly at my e-mail address: michaeljerger@hotmail.com ! This message is for beginners who don't know where to turn to get Solaris...
Summary: Hi, Has any one of you configured a just out of box (Cisco or any other) router on a Solaris system. Normally we configure a just out of box router u...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
