Summary: Hi, i'm using RT314. I tried closing all ports on my pc. I saved the configuration on the router, so it's won't allow anything in. However even after ...
Summary: using charter pipeline (shudder) with a cable modem and a neatgear router. we have 3 computers hooked up to a network. the third computer keeps losing...
Summary: Hi to all. I have Linksys Router with port forward activated to a static IP computer. Also Upnp is activated. Its been working fine for years, but rec...
Summary: I have a SMC Barricade router, and I was wondering how I open these ports: Connection Ports for Client Configuration Ports for Host Configuration ...
Summary: Hi there, I have used up the 4 available ports on the back on my adsl router. As I understand my router can take a maximum of 255 computers, so can I ...
Summary: Is it possible to script port forwarding on a router? For example, instead of using the web interface, being able to automate it using a script. I'v...
Summary: Each PC has to have a NIC card and they in turn will connect into the router ports. The modem ETHERNET (LAN) connection will connect to the router INT...
Summary: Hi, Sorry for the intrusion, but Google brought me here via another very old, similar question. I, too, would like to see if I can daisy chain two rou...
Summary: Iam using an SMC 7004BR Router on my netwiork. I want to use gamespy but I am behind a firewall. I contacted the gamespy website and they said that th...
Summary: Hi i recently setup a small webserver at my home for my small website for my cousin and my brother and I because i can't afford a host that has ASP, A...
Summary: I recently tested my computers security by probing my ports i found all ports closed except one..port 80. I went on router setup page and found a sett...
Summary: Iam using an SMC 7004BR Router on my netwiork. I want to use gamespy but I am behind a firewall. I contacted the gamespy website and they said that th...
Summary: Professionally I disagree, but it is "an" option. The diference is is that with ACL you have to "know" what ports you want to block, with a firewall,...
Summary: what do i need to do in order to forward port 7127 on my computer..i have a linksys router. I want to be able to connect to my computer on this port. ...
Summary: Most basic setup would be to access your router and forward the needed ports to your computer's IP address. This will be like dropping your computer'...
Summary: How can I expand my wired router to aloow for more than 4 ports, I need 2 or 3 more. Can I simply put a ethernet switch or HUB behind the router and...
Summary: I have successfully set up a 3 computer network sharing a cable broadband connection using a DLink DI-704P router. I have also installed a VNC and FTP...
Summary: Thanks very much.... I have uninstalled and reinstalled the card...it seems/reports to be fine...and there is an electrical connection between it and ...
Summary: I have an old Linksys BEFSR41 v3 router, and LAN port 4 doesn't work well. When I hook computer A up to it it won't connect to the network at all, whe...
Summary: I have a Linksys BEFSR41 router running firmware 1.42.6 and I am trying to forward port 80 so I can run web server at home. I've made sure I have don...
Summary: The first issue is the built-in firewall in the router. It would be blocking requests into your server if enabled. You must get around this blocking. ...
Summary: Iam using an SMC 7004BR Router on my netwiork. I want to use gamespy but I am behind a firewall. I contacted the gamespy website and they said that t...
Summary: hi i have an smc router and i've managed to get my ftp up and running. the only thing is that people who are behind routers cannot access my ftp. it i...
Summary: I recently purchased a new SMC wireless broadband router. Model# SMC2804WBRP-G, Product# 751.7878. I have a requirement to be able to block AOL's Inst...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
