Summary: I have a SMC Barricade router, and I was wondering how I open these ports: Connection Ports for Client Configuration Ports for Host Configuration ...
Summary: Hi, i'm using RT314. I tried closing all ports on my pc. I saved the configuration on the router, so it's won't allow anything in. However even after ...
Summary: Hi there, I have used up the 4 available ports on the back on my adsl router. As I understand my router can take a maximum of 255 computers, so can I ...
Summary: Is it possible to script port forwarding on a router? For example, instead of using the web interface, being able to automate it using a script. I'v...
Summary: Hi, Sorry for the intrusion, but Google brought me here via another very old, similar question. I, too, would like to see if I can daisy chain two rou...
Summary: Iam using an SMC 7004BR Router on my netwiork. I want to use gamespy but I am behind a firewall. I contacted the gamespy website and they said that th...
Summary: Hi i recently setup a small webserver at my home for my small website for my cousin and my brother and I because i can't afford a host that has ASP, A...
Summary: Iam using an SMC 7004BR Router on my netwiork. I want to use gamespy but I am behind a firewall. I contacted the gamespy website and they said that th...
Summary: what do i need to do in order to forward port 7127 on my computer..i have a linksys router. I want to be able to connect to my computer on this port. ...
Summary: Most basic setup would be to access your router and forward the needed ports to your computer's IP address. This will be like dropping your computer'...
Summary: How can I expand my wired router to aloow for more than 4 ports, I need 2 or 3 more. Can I simply put a ethernet switch or HUB behind the router and...
Summary: I have successfully set up a 3 computer network sharing a cable broadband connection using a DLink DI-704P router. I have also installed a VNC and FTP...
Summary: I have an old Linksys BEFSR41 v3 router, and LAN port 4 doesn't work well. When I hook computer A up to it it won't connect to the network at all, whe...
Summary: I have a Linksys BEFSR41 router running firmware 1.42.6 and I am trying to forward port 80 so I can run web server at home. I've made sure I have don...
Summary: The first issue is the built-in firewall in the router. It would be blocking requests into your server if enabled. You must get around this blocking. ...
Summary: Iam using an SMC 7004BR Router on my netwiork. I want to use gamespy but I am behind a firewall. I contacted the gamespy website and they said that t...
Summary: hi i have an smc router and i've managed to get my ftp up and running. the only thing is that people who are behind routers cannot access my ftp. it i...
Summary: I recently purchased a new SMC wireless broadband router. Model# SMC2804WBRP-G, Product# 751.7878. I have a requirement to be able to block AOL's Inst...
Summary: I have a Linksys BEFSR41 4-port router that works fine in all respects except Port 1 (LAN, not Uplink) does not work. Listed symptoms are as follows: ...
Summary: Can anyone help me figure out what ports to open on my Linksys Router so that I can host games for Nascar 2002? Any help would be appreciated. Thank...
Summary: Hi to all. I have Linksys Router with port forward activated to a static IP computer. Also Upnp is activated. Its been working fine for years, but rec...
Summary: Hello. Here is my situation: - I have your average LAMP server (running Ubuntu Hardy Heron) on my local network. - My router is a DLink DI-624 (Rev...
Summary: i need to activate the belkin virtual server function where could i find the relevant port numbers to configure above. ie realplayer and mp9 access. t...
Summary: Here's what I have: Linux webserver behind a 4-port Linksys router. All access from Linux box to external Internet works, however no one can access my...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
