Summary: I have a Acer Extensa 2308 notebook, bought 2nd hand, replace HD coz was dead. thats working fine now, install windows and all. But got 1 problem that...
Summary: When I start my laptop, I get the following error message: Error Resource Conflict - PCI on Motherboard Bus:00, Device:0C, Function:00 It allows me t...
Summary: It possibily could be your video card drivers. I wouldn't look necessarily at the video card, but video card drivers are one of the leading causes of ...
Summary: guys i really need help here and would appreiatte if anyone would just take 2 mins to help me out. im trying to get my saitek joystick to work through...
Summary: I am running Windows XP on an IBM A30 ThinkPad. I have resource conflicts with my token ring adapter and the PS/2 (mouse) on my docking station. I ha...
Summary: Usually down the bottom of your start up screen , it tells you what to press . If your screen flashes past tp quick , hit pause , you can now read eac...
Summary: You may be able to get more info about what your problem is in System Information somewhere (e.g. Start - Run - type: msinfo32, click OK) E.g. Look un...
Summary: Here is my setup: Asus P4B, Asus V8200T2/PURE/64M AGP , Maxtor 40Gb,30GB,!0Gb, WD10GB drives, Plextor 10x12x30 Cdr/RW, Asus 50x Cd,Us Robotic Pro Mode...
Summary: What It Is Is I Have A Nvidia Geforce FX 5200 TV&DVI OUT 256MB When I Put This Card Into My PC Windows Does Not Recognise It And Uses A VGASave Instea...
Summary: Ive checked out these good replies on the search engine at the top of this page It all depends on your motherboard. On some you can change the sound ...
Summary: Troubleshooting STOP: 0x0000007B or "0x4,0,0,0" Error (Q122926) The information in this article applies to: Microsoft Windows XP Professional Microsof...
Summary: hi, my computer is up for win xp and win 98 as options...but during the start up i dont have any to enter into bios mode....now i want to change my...
Summary: If the KBoard works during the POST screens then the legusy USB device must already be enabled. Enter the BIOS screens and look to see that PnP OS i...
Summary: I have two HP Pavilions, one 8575 and one 4430 that refuse to boot up. I recently upgraded the 8575 (Pentiun III 500 MHz) to XP Pro and added a G-...
Summary: When i go to start my computer it stops at the bios screen i cant do anything from there. The keyboard the mouse nothing functions its like the comput...
Summary: "Yes, I had (and still have) the onboard touchpad disabled thru BIOS. But still no luck." I said... "If you do not need to use the laptop touchpad, ta...
Summary: here is the sys info (if it can help): System Information report written at: 11/08/2002 14:14:42 System Name: ROSSENNEW [System Summary] Item Value O...
Summary: Gee, I just don't mess up a little but a LOT! After changing my inactive HD to active (my other post explains the problem wtih the drive letters) via ...
Summary: Hello, after disinstalling Epson printer drivers and bundled software, and performing a clean up of the HDD, and defragmentation of the same, the lapt...
Summary: hi peeps. first of all; i am usually not a windows user but i have one software that forces me to use XP. i have 2 graphics card: 1x gf4(agp) and 1x ...
Summary: Using System Restore too many times can cause more harm than good. After doing a restore that does not fix a problem, then UNDO the Restoration. -----...
Summary: Your intentions are good, but you should really look into using linux for this job. If you want to create a router or firewall, there are linux distr...
Summary: How to Perform a Clean Boot in Windows XP To help troubleshoot error messages or other issues when you cannot determine the cause of the issue, disabl...
Summary: Whenever i start my computer, in between the compaq and the windows XP screen, there is an error message. i called HP and they said it was a software ...
Summary: Yesterday I did a complete reformat of my 2 hard-drives (one 20GB and one 40GB) and a clean install of a dual-boot ME/XP Pro (which I've had up and ru...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
