Summary: Just thought I would get some expert input on this ;) My neighbours computer continually resets just after the bios. I can get into the bios sett...
Summary: Recovering Gigabyte 7NF RZ after BIOS change! I wonder if someone can give me any advice. My friend has a Gigabyte 7NF RZ with a Sempron 2200 (I think...
Summary: Having problems and not finding answers. So am thinking about resetting the bios? Is is fairly safe to go into bios and reset to the default values? J...
Summary: If you floppy isn't working how did you upgrade the BIOS in the first place? Have you been into the BIOS and reset the BIOS setting. If it crashes be...
Summary: I suggest you read thru the BIOS section of your manual for an explanation of what all these settings are. Here's my take: "Top Performance from Disab...
Summary: Easiest thing to try is to unplug the mains, open the case & either find the 'clear CMOS' jumper, or remove the small cell battery from the motherboar...
Summary: Here's my dilema: I built my new computer - once I got it up and running, everything seemed to be fine. However, yesterday, it decided to start booti...
Summary: Hi, I've just put a new computer together, installed windows and got it all running ok. Only problem is that when I turn the computer on, i hear the c...
Summary: It was suggested to reset my bios to their default status after I flashed the bios. Now I cant get into the bios screen at all any suggestions as wha...
Summary: I have this laptop (Acer Aspire 5315) for two years now and it has always worked fine hardware wise, quirks but what laptop doesn't have them. For the...
Summary: I have never flashed the BIOS before, but I did and all went well, my newer CPU was accepted and everything is fine... My Questions are : 1.If I form...
Summary: I do not know your pc, but the jumper you require normally has 3 pins (two of which are linked) and is usually the only jumber situated in close proxi...
Summary: Alright, so I've upgraded my power supply and my processor. PC Power & Cooling 350 / Thermaltake Silent Purepower 420 Athlon XP 2200+ / Athlon XP 2500...
Summary: i have a M-5169 Super Socket 7 motherboard with CPU, RAM, etc.troue is neto access the BIOS and whoever had it before me put a password on it. i can...
Summary: Im not sure if this is the correct forum but here it goes. I have an Asus P4P800-E Deluxe motherboard. Two harddisks, 1 SATA w/OS and 1 IDE w/data. A...
Summary: Hello, Problem: The computer will quite often not even boot into bios, t.i I cant press F2 to get into bios. When this happens I switch the powerbutt...
Summary: The first boot may stop at the BIOS post screen and request that you enter setup, or load defaults. I had this happen on two systems I was repairing w...
Summary: To get an answer, you'll need to fill in the blanks. What make/model motherboard & CPU. Is the RAM PC100/PC133 or DDR? If it's DDR, is it PC2100, 2700...
Summary: Thanks guys for your time and advice. It really helped alot. I took out the bios battery and reset the bios jumper, and soon after the monitor screen ...
Summary: I am trying to get my old Epson Equity II+ to work. After years of laying around it lost its internal configuration of the hard drive, etc. It needs...
Summary: Hey all. I have an AMD k6 2-500 CPU/MB and for some reason after the bio screen disappears the computer hangs and the monitor loses connection. Afte...
Summary: Hi, Usually the reset header is 3 pins with a small Plastic, usually black about 1/4" tall and 1/16" thick, two pin jumper. Run position is usually wi...
Summary: just look for ur motherboard manual and locate the jumper switch to reset ur bios ,,attention do as it is indicated otherwise u may damage ur bios i g...
Summary: My advice would be to reset the BIOS to the original then do some more home work before trying to flash it again, most boards have ways of returning t...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
